P1446 Code défaut de diagnostic (11 interprétations)

The control module detected a fault associated with the Hybrid battery pack - individual voltage input deviation circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Honda.

The control module detected improper operation of the Evaporative emission (EVAP) leak detection module solenoid circuit. This is the manufacturer-specific definition used by Kia.

The control module detected a condition consistent with a leak affecting the Diagnostic Module Tank. This is the manufacturer-specific definition used by MINI.

The control module detected improper operation of the Evaporative emission (EVAP) canister purge system - vent control valve. This is the manufacturer-specific definition used by Nissan.

The control module detected the fault condition "Insufficient quantity of additive remaining in the reservoir" for the Particle filter additive system. Documented for the Bosch EDC16C34 injection ECU (DV6TED4 1.6 HDi) on Peugeot applications; the same PSA control units are also fitted to Citroën models.

The control module detected the fault condition "Calculated additive level below the critical threshold" for the Additive adding. Documented for the Continental SID 807 injection ECU (DV6C 1.6 HDi) on Peugeot applications; the same PSA control units are also fitted to Citroën models.

The control module detected the fault condition "Calculated additive level below the critical threshold" for the Additive adding. Documented for the Delphi DCM 3.5 injection ECU (DW10C 2.0 HDi) on Peugeot applications; the same PSA control units are also fitted to Citroën models.

The control module detected the fault condition "Insufficient quantity of additive remaining in the reservoir" for the Particle filter additive system. Documented for the Siemens SID 803 injection ECU (DW10BTED4 2.0 HDi) on Peugeot applications; the same PSA control units are also fitted to Citroën models.

The control module detected that the Evaporative emission (EVAP) canister purge valve voltage stayed below the expected range. This is the manufacturer-specific definition used by Subaru.

The control module detected a short circuit to ground in the Catalyst Temperature circuit. This is the manufacturer-specific definition used by Audi.

The control module detected a short circuit to ground in the Catalyst Temperature circuit. This is the manufacturer-specific definition used by Volkswagen.