Heures : 07h–23h tous les jours

Base de données DTC TuningBot · v4.37.15

P1400 Code défaut de diagnostic (12 interprétations)

12 interprétations spécifiques au constructeur chez 12 constructeurs dans la base DTC TuningBot.

Chevrolet

1 interprétation
P1400
Cold start emission control - malfunction Chevrolet · engine Fiabilité de la donnée 62%

The control module detected improper operation of the Cold start emission control. This is the manufacturer-specific definition used by Chevrolet.

Causes possibles

  • Intake/exhaust leak/blockage
  • mechanical fault
  • idlespeed control (ISC) system
  • ignition control
  • engine coolant temperature (ECT) sensor
  • HO2S

Chrysler

1 interprétation
P1400
Manifold differential pressure (MOP) sensor,EGR system - circuit malfunction Chrysler · emissions Fiabilité de la donnée 62%

The control module detected improper operation of the Manifold differential pressure (MOP) sensor,EGR system circuit. This is the manufacturer-specific definition used by Chrysler.

Causes possibles

  • Wiring
  • MOP sensor
  • ECM

Dodge

1 interprétation
P1400
Manifold differential pressure (MOP) sensor,exhaust gas recirculation (EGR) system - circuit malfunction Dodge · emissions Fiabilité de la donnée 62%

The control module detected improper operation of the Manifold differential pressure (MOP) sensor,exhaust gas recirculation (EGR) system circuit. This is the manufacturer-specific definition used by Dodge.

Causes possibles

  • Wiring
  • MOP sensor
  • ECM

Ford

1 interprétation
P1400
Differential Pressure Feedback Electronic Sensor Circuit Low Voltage Ford · emissions Fiabilité de la donnée 80%

The control module detected that the signal in the Differential Pressure Feedback Electronic circuit stayed below the expected operating range. This is the manufacturer-specific definition used by Ford.

Causes possibles

  • Wiring
  • EGR pressure sensor
  • ECM

Vérifications recommandées

  • Perform a full module scan
  • Review freeze-frame and occurrence data
  • Inspect relevant wiring and connectors
  • Check power supplies and grounds
  • Compare commanded and measured values
  • Check applicable OEM service information

Hyundai

1 interprétation
P1400
Manifold Diff. Pressure Sensor Hyundai · engine Fiabilité de la donnée 62%

The control module detected a fault associated with the Manifold Diff. Pressure Sensor circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Hyundai.

Causes possibles

  • Wiring
  • EGR solenoid
  • EGR valve
  • mechanical fault
  • ECM

Jeep

1 interprétation
P1400
Manifold Differential Pressure sensor condition Jeep · emissions Fiabilité de la donnée 62%

The control module detected a fault associated with the Manifold Differential Pressure sensor condition circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Jeep.

Land Rover

1 interprétation
P1400
Exhaust gas pressure sensor - voltage low Land Rover · engine Fiabilité de la donnée 62%

The control module detected that the Exhaust gas pressure voltage stayed below the expected range. This is the manufacturer-specific definition used by Land Rover.

Causes possibles

  • Wiring short to ground
  • exhaust gas pressure sensor
  • ECM

Mercedes-Benz

1 interprétation
P1400
Exhaust gas recirculation (EGR) solenoid - circuit malfunction Mercedes-Benz · emissions Fiabilité de la donnée 62%

The control module detected improper operation of the Exhaust gas recirculation (EGR) solenoid circuit. This is the manufacturer-specific definition used by Mercedes-Benz.

Causes possibles

  • Wiring
  • EGR solenoid
  • hose(s)
  • ECM

MINI

1 interprétation
P1400
Heated Catalyst Battery Voltage or Current too Low During Heating Bank 1 MINI · emissions Fiabilité de la donnée 62%

The control module detected that the Heated Catalyst Battery Voltage or Current value was below the expected limit. This is the manufacturer-specific definition used by MINI.

Mitsubishi

1 interprétation
P1400
Manifold absolute pressure (MAP) sensor - circuit malfunction Mitsubishi · engine Fiabilité de la donnée 80%

The control module detected improper operation of the Manifold absolute pressure (MAP) circuit. This is the manufacturer-specific definition used by Mitsubishi.

Causes possibles

  • Wiring
  • MAP sensor
  • ECM

VAG

1 interprétation
P1400
Exhaust gas recirculation (EGR) valve/solenoid, Bank 1 - circuit malfunction VAG · emissions Fiabilité de la donnée 62%

The control module detected improper operation of the Exhaust gas recirculation (EGR) valve/solenoid, Bank 1 circuit. This is the manufacturer-specific definition used by Audi.

Causes possibles

  • Wiring
  • EGR valve
S'applique à Audi

Volvo

1 interprétation
P1400
Outside air temperature sensor - signal low Volvo · engine Fiabilité de la donnée 62%

The control module detected that the Outside air temperature signal stayed below the expected range. This is the manufacturer-specific definition used by Volvo.

Causes possibles

  • Wiring
  • short to ground
  • poor connection
  • outside air temperature sensor
  • ECM

Codes liés et voisins

Comment lire P1400

P

Groupe motopropulseur : moteur, boîte et transmission.

1

Plage définie par le constructeur : la signification peut varier selon les marques.

400

Index de défaut spécifique dans le sous-système.

Questions fréquentes sur P1400

Que signifie P1400 ?

Code défaut de diagnostic (12 interprétations). The control module detected improper operation of the Cold start emission control. This is the manufacturer-specific definition used by Chevrolet.

P1400 est-il générique ou spécifique au constructeur ?

P1400 est un code spécifique au constructeur. Dans cette base il est documenté pour : Chevrolet, Chrysler, Dodge, Ford, Hyundai, Jeep, Land Rover, Mercedes-Benz, MINI, Mitsubishi, VAG, Volvo. Le même numéro peut signifier autre chose sur d'autres marques.

TuningBot peut-il supprimer P1400 au niveau du fichier ?

Si la logique du défaut réside dans la calibration de l'ECU, oui : notre service DTC Removal désactive l'entrée de défaut concernée. La correction du checksum n'est pas incluse : c'est un service à part, en option. Vous ne savez pas si votre cas est concerné ? Demandez une évaluation gratuite et nos ingénieurs examineront votre fichier.

Autres services fichier

ReprogrammationRésultats mesurés au banc, par modèle et moteur Voir les résultats →

← Rechercher dans toute la base DTC