Heures : 07h–23h tous les jours

Base de données DTC TuningBot · v4.37.15

P1403 Code défaut de diagnostic (12 interprétations)

12 interprétations spécifiques au constructeur chez 6 constructeurs dans la base DTC TuningBot.

P · Groupe motopropulseurEmissionsOBD2

Ford

1 interprétation
P1403
Differential Pressure Feedback Electronic Sensor Hoses Reversed Ford · emissions Fiabilité de la donnée 80%

The control module detected a fault associated with the Differential Pressure Feedback Electronic Sensor Hoses Reversed circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Ford.

Vérifications recommandées

  • Perform a full module scan
  • Review freeze-frame and occurrence data
  • Compare commanded and measured values
  • Check applicable OEM service information

Kia

1 interprétation
P1403
Evaporative emission (EVAP) leak detection module solenoid - circuit malfunction Kia · emissions Fiabilité de la donnée 62%

The control module detected improper operation of the Evaporative emission (EVAP) leak detection module solenoid circuit. This is the manufacturer-specific definition used by Kia.

Causes possibles

  • Wiring
  • EVAP leak detection module solenoid

Land Rover

1 interprétation
P1403
Pressure transducer - hoses transposed Land Rover · engine Fiabilité de la donnée 62%

The control module detected a fault associated with the Pressure transducer - hoses transposed circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Land Rover.

Causes possibles

  • Hose blocked/missing/transposed
  • mechanical fault
  • pressure transducer

Mazda

1 interprétation
P1403
Differential pressure feedback sensor - hoses reversed Mazda · emissions Fiabilité de la donnée 62%

The control module detected a fault associated with the Differential pressure feedback sensor - hoses reversed circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Mazda.

Causes possibles

Mechanical fault

PSA

6 interprétations
P1403
Additional heating circuit 1 : Short circuit to earth, short circuit to positive, open circuit or actuator malfunction PSA · engine Fiabilité de la donnée 72%

The control module detected a short circuit to ground in the Additional heating circuit 1 circuit. Documented for the Bosch EDC16C34 injection ECU (DV6TED4 1.6 HDi) on Peugeot applications; the same PSA control units are also fitted to Citroën models.

S'applique à Peugeot Bosch EDC16C34 injection ECU (DV6TED4 1.6 HDi)
P1403
Additional heating relay control fault : Open circuit, short circuit to positive, short circuit to earth PSA · engine Fiabilité de la donnée 72%

The control module detected an interruption (open circuit) in the Additional heating relay control fault circuit. Documented for the Bosch MED 17.4.x engine ECU (EP6 THP family) on Peugeot applications; the same PSA control units are also fitted to Citroën models.

S'applique à Peugeot Bosch MED 17.4.x engine ECU (EP6 THP family)
P1403
Additional heating relay control fault : Short circuit to earth / Short circuit to positive / Open circuit PSA · engine Fiabilité de la donnée 72%

The control module detected a short circuit to ground in the Additional heating relay control fault circuit. Documented for the Bosch MEV17.4 engine ECU (EP6 1.6 VTi) on Peugeot applications; the same PSA control units are also fitted to Citroën models.

S'applique à Peugeot Bosch MEV17.4 engine ECU (EP6 1.6 VTi)
P1403
Control of additional heating 1 : Open circuit or short circuit to positive or short circuit to earth PSA · engine Fiabilité de la donnée 72%

The control module detected an interruption (open circuit) in the Control of additional heating 1 circuit. Documented for the Continental SID 807 injection ECU (DV6C 1.6 HDi) on Peugeot applications; the same PSA control units are also fitted to Citroën models.

S'applique à Peugeot Continental SID 807 injection ECU (DV6C 1.6 HDi)
P1403
1 additional heating : Electrical faults : Open circuit, short circuit to positive, short circuit to earth PSA · engine Fiabilité de la donnée 72%

The control module detected an interruption (open circuit) in the 1 additional heating circuit. Documented for the Delphi DCM 3.5 injection ECU (DW10C 2.0 HDi) on Peugeot applications; the same PSA control units are also fitted to Citroën models.

S'applique à Peugeot Delphi DCM 3.5 injection ECU (DW10C 2.0 HDi)
P1403
Additional heating circuit 1 : Short circuit to earth, short circuit to positive, open circuit or actuator malfunction PSA · engine Fiabilité de la donnée 72%

The control module detected a short circuit to ground in the Additional heating circuit 1 circuit. Documented for the Siemens SID 803 injection ECU (DW10BTED4 2.0 HDi) on Peugeot applications; the same PSA control units are also fitted to Citroën models.

S'applique à Peugeot Siemens SID 803 injection ECU (DW10BTED4 2.0 HDi)

VAG

2 interprétations
P1403
Exhaust gas recirculation (EGR) system - control difference VAG · emissions Fiabilité de la donnée 62%

The control module detected that closed-loop control of the Exhaust gas recirculation (EGR) system deviated from its target. This is the manufacturer-specific definition used by Audi.

Causes possibles

  • Basic setting not carried out
  • EGR system
S'applique à Audi
P1403
EGR System: Regulation Deviation VAG · emissions Fiabilité de la donnée 80%

The control module detected that closed-loop control of the EGR System deviated from its target. This is the manufacturer-specific definition used by Volkswagen. Volkswagen Group tools also report it as fault code 17811. Documented across Volkswagen Group applications (Audi, SEAT and Škoda included).

Causes possibles

  • Exhaust Gas Recirculation (EGR) faulty
  • Exhaust Gas Recirculation (EGR) Valve (N18) faulty

Vérifications recommandées

  • Check Exhaust Gas Recirculation (EGR)
  • Check Exhaust Gas Recirculation (EGR) Valve (N18)
S'applique à Volkswagen

Codes liés et voisins

Comment lire P1403

P

Groupe motopropulseur : moteur, boîte et transmission.

1

Plage définie par le constructeur : la signification peut varier selon les marques.

403

Index de défaut spécifique dans le sous-système.

Questions fréquentes sur P1403

Que signifie P1403 ?

Code défaut de diagnostic (12 interprétations). The control module detected a fault associated with the Differential Pressure Feedback Electronic Sensor Hoses Reversed circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Ford.

P1403 est-il générique ou spécifique au constructeur ?

P1403 est un code spécifique au constructeur. Dans cette base il est documenté pour : Ford, Kia, Land Rover, Mazda, PSA, VAG. Le même numéro peut signifier autre chose sur d'autres marques.

TuningBot peut-il supprimer P1403 au niveau du fichier ?

Si la logique du défaut réside dans la calibration de l'ECU, oui : notre service DTC Removal désactive l'entrée de défaut concernée. La correction du checksum n'est pas incluse : c'est un service à part, en option. Vous ne savez pas si votre cas est concerné ? Demandez une évaluation gratuite et nos ingénieurs examineront votre fichier.

Autres services fichier

ReprogrammationRésultats mesurés au banc, par modèle et moteur Voir les résultats →

← Rechercher dans toute la base DTC