Hours: 07–23 daily

TuningBot DTC Database · v4.37.14

P1403 Diagnostic Trouble Code (12 interpretations)

12 manufacturer-specific interpretations across 6 manufacturers in the TuningBot DTC database.

P · PowertrainEmissionsOBD2

Ford

1 interpretation
P1403
Differential Pressure Feedback Electronic Sensor Hoses Reversed Ford · emissions Data confidence 80%

The control module detected a fault associated with the Differential Pressure Feedback Electronic Sensor Hoses Reversed circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Ford.

Recommended checks

  • Perform a full module scan
  • Review freeze-frame and occurrence data
  • Compare commanded and measured values
  • Check applicable OEM service information

Kia

1 interpretation
P1403
Evaporative emission (EVAP) leak detection module solenoid - circuit malfunction Kia · emissions Data confidence 62%

The control module detected improper operation of the Evaporative emission (EVAP) leak detection module solenoid circuit. This is the manufacturer-specific definition used by Kia.

Possible causes

  • Wiring
  • EVAP leak detection module solenoid

Land Rover

1 interpretation
P1403
Pressure transducer - hoses transposed Land Rover · engine Data confidence 62%

The control module detected a fault associated with the Pressure transducer - hoses transposed circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Land Rover.

Possible causes

  • Hose blocked/missing/transposed
  • mechanical fault
  • pressure transducer

Mazda

1 interpretation
P1403
Differential pressure feedback sensor - hoses reversed Mazda · emissions Data confidence 62%

The control module detected a fault associated with the Differential pressure feedback sensor - hoses reversed circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Mazda.

Possible causes

Mechanical fault

PSA

6 interpretations
P1403
Additional heating circuit 1 : Short circuit to earth, short circuit to positive, open circuit or actuator malfunction PSA · engine Data confidence 72%

The control module detected a short circuit to ground in the Additional heating circuit 1 circuit. Documented for the Bosch EDC16C34 injection ECU (DV6TED4 1.6 HDi) on Peugeot applications; the same PSA control units are also fitted to Citroën models.

Applies to Peugeot Bosch EDC16C34 injection ECU (DV6TED4 1.6 HDi)
P1403
Additional heating relay control fault : Open circuit, short circuit to positive, short circuit to earth PSA · engine Data confidence 72%

The control module detected an interruption (open circuit) in the Additional heating relay control fault circuit. Documented for the Bosch MED 17.4.x engine ECU (EP6 THP family) on Peugeot applications; the same PSA control units are also fitted to Citroën models.

Applies to Peugeot Bosch MED 17.4.x engine ECU (EP6 THP family)
P1403
Additional heating relay control fault : Short circuit to earth / Short circuit to positive / Open circuit PSA · engine Data confidence 72%

The control module detected a short circuit to ground in the Additional heating relay control fault circuit. Documented for the Bosch MEV17.4 engine ECU (EP6 1.6 VTi) on Peugeot applications; the same PSA control units are also fitted to Citroën models.

Applies to Peugeot Bosch MEV17.4 engine ECU (EP6 1.6 VTi)
P1403
Control of additional heating 1 : Open circuit or short circuit to positive or short circuit to earth PSA · engine Data confidence 72%

The control module detected an interruption (open circuit) in the Control of additional heating 1 circuit. Documented for the Continental SID 807 injection ECU (DV6C 1.6 HDi) on Peugeot applications; the same PSA control units are also fitted to Citroën models.

Applies to Peugeot Continental SID 807 injection ECU (DV6C 1.6 HDi)
P1403
1 additional heating : Electrical faults : Open circuit, short circuit to positive, short circuit to earth PSA · engine Data confidence 72%

The control module detected an interruption (open circuit) in the 1 additional heating circuit. Documented for the Delphi DCM 3.5 injection ECU (DW10C 2.0 HDi) on Peugeot applications; the same PSA control units are also fitted to Citroën models.

Applies to Peugeot Delphi DCM 3.5 injection ECU (DW10C 2.0 HDi)
P1403
Additional heating circuit 1 : Short circuit to earth, short circuit to positive, open circuit or actuator malfunction PSA · engine Data confidence 72%

The control module detected a short circuit to ground in the Additional heating circuit 1 circuit. Documented for the Siemens SID 803 injection ECU (DW10BTED4 2.0 HDi) on Peugeot applications; the same PSA control units are also fitted to Citroën models.

Applies to Peugeot Siemens SID 803 injection ECU (DW10BTED4 2.0 HDi)

VAG

2 interpretations
P1403
Exhaust gas recirculation (EGR) system - control difference VAG · emissions Data confidence 62%

The control module detected that closed-loop control of the Exhaust gas recirculation (EGR) system deviated from its target. This is the manufacturer-specific definition used by Audi.

Possible causes

  • Basic setting not carried out
  • EGR system
Applies to Audi
P1403
EGR System: Regulation Deviation VAG · emissions Data confidence 80%

The control module detected that closed-loop control of the EGR System deviated from its target. This is the manufacturer-specific definition used by Volkswagen. Volkswagen Group tools also report it as fault code 17811. Documented across Volkswagen Group applications (Audi, SEAT and Škoda included).

Possible causes

  • Exhaust Gas Recirculation (EGR) faulty
  • Exhaust Gas Recirculation (EGR) Valve (N18) faulty

Recommended checks

  • Check Exhaust Gas Recirculation (EGR)
  • Check Exhaust Gas Recirculation (EGR) Valve (N18)
Applies to Volkswagen

Related and nearby codes

How to read P1403

P

Powertrain: engine, transmission and driveline systems.

1

Manufacturer-defined range: the meaning can differ between brands.

403

Specific fault index within the subsystem.

Frequently asked questions about P1403

What does P1403 mean?

Diagnostic Trouble Code (12 interpretations). The control module detected a fault associated with the Differential Pressure Feedback Electronic Sensor Hoses Reversed circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Ford.

Is P1403 generic or manufacturer-specific?

P1403 is a manufacturer-specific code. In this database it is documented for: Ford, Kia, Land Rover, Mazda, PSA, VAG. The same number can mean something different on other brands.

Can TuningBot remove P1403 at file level?

If the fault logic lives in the ECU calibration, yes: our DTC Removal file service disables the specific fault entry and, where the ECU needs it, corrects the checksum too. Not sure whether your case qualifies? Request a free assessment and our engineers will check your ECU file.

Other file services

ECU tuningDyno-tested results by model and engine See the results →

← Search the full DTC database