P1499 Code défaut de diagnostic (6 interprétations)

The control module detected a fault associated with the Hydraulic Cooling Fan Solenoid Circuit Condition circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Chrysler.

The control module detected a fault associated with the Hydraulic Cooling Fan Solenoid Circuit Condition circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Dodge.

The control module detected an interruption (open circuit) in the Exhaust gas recirculation (EGR) valve coil 4 - short/ circuit, so the expected electrical continuity was not present. This is the manufacturer-specific definition used by Mazda.

The control module detected the fault condition "Position incorrect (open too far) (After sales)" for the Air mixer. Documented for the Continental SID 807 injection ECU (DV6C 1.6 HDi) on Peugeot applications; the same PSA control units are also fitted to Citroën models.

The control module detected the fault condition "Position incorrect (Open too far) (APV)" for the Air mixer. Documented for the Delphi DCM 3.5 injection ECU (DW10C 2.0 HDi) on Peugeot applications; the same PSA control units are also fitted to Citroën models.

The control module detected that the Exhaust gas recirculation (EGR) solenoid valve - signal 4 voltage stayed above the expected range. This is the manufacturer-specific definition used by Subaru.