Base de datos DTC de TuningBot · v4.37.15
10 interpretaciones específicas del fabricante en 7 fabricantes, en la base de datos DTC de TuningBot.
FordThe control module detected a fault associated with the Unable To Pull Vacuum In Tank circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Ford.
HondaThe control module detected a condition consistent with a leak affecting the Evaporative emission (EVAP) canister purge system (canister system). This is the manufacturer-specific definition used by Honda.
HyundaiThe control module detected improper operation of the Purge Solenoid Valve Low System. This is the manufacturer-specific definition used by Hyundai.
PorscheThe control module detected a fault associated with the A/C Compressor Control circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Porsche.
PSAThe control module detected the fault condition "Particle filter holed or absent" for the Particle filter fault. Documented for the Bosch EDC16C34 injection ECU (DV6TED4 1.6 HDi) on Peugeot applications; the same PSA control units are also fitted to Citroën models.
The control module detected the fault condition "Detected absent" for the Particle filter. Documented for the Continental SID 807 injection ECU (DV6C 1.6 HDi) on Peugeot applications; the same PSA control units are also fitted to Citroën models.
The control module detected the fault condition "Detected absent" for the Particle filter. Documented for the Delphi DCM 3.5 injection ECU (DW10C 2.0 HDi) on Peugeot applications; the same PSA control units are also fitted to Citroën models.
The control module detected the fault condition "Particle filter holed or absent" for the Particle filter fault. Documented for the Siemens SID 803 injection ECU (DW10BTED4 2.0 HDi) on Peugeot applications; the same PSA control units are also fitted to Citroën models.
VAGThe control module detected an interruption (open circuit) in the Exhaust gas recirculation temperature (EGRT) sensor 2/Bank 2 circuit, so the expected electrical continuity was not present. This is the manufacturer-specific definition used by Audi.
VolvoThe control module detected a leak in the Evaporative emission system during the system leak monitor. This is the manufacturer-specific definition used by Volvo.
Motor y transmisión: motor, cambio y transmisión.
Rango definido por el fabricante: el significado puede variar entre marcas.
Índice específico del fallo dentro del subsistema.
Código de avería diagnóstico (10 interpretaciones). The control module detected a fault associated with the Unable To Pull Vacuum In Tank circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Ford.
P1457 es un código específico del fabricante. En esta base de datos está documentado para: Ford, Honda, Hyundai, Porsche, PSA, VAG, Volvo. El mismo número puede significar otra cosa en otras marcas.
Si la lógica del fallo vive en la calibración de la ECU, sí: nuestro servicio DTC Removal desactiva la entrada de fallo concreta. La corrección del checksum no está incluida: es un servicio aparte y opcional. ¿No sabes si tu caso encaja? Solicita una valoración gratuita y nuestros ingenieros revisarán tu archivo.
Entender el sistema detrás de este código: Sistema EVAP
EnglishEN
ItalianoIT
DeutschDE
PortuguêsPT
FrançaisFR
РусскийRU