Base de dados DTC TuningBot · v4.37.15
10 interpretações específicas do fabricante em 7 fabricantes na base de dados DTC TuningBot.
FordThe control module detected a fault associated with the Unable To Pull Vacuum In Tank circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Ford.
HondaThe control module detected a condition consistent with a leak affecting the Evaporative emission (EVAP) canister purge system (canister system). This is the manufacturer-specific definition used by Honda.
HyundaiThe control module detected improper operation of the Purge Solenoid Valve Low System. This is the manufacturer-specific definition used by Hyundai.
PorscheThe control module detected a fault associated with the A/C Compressor Control circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Porsche.
PSAThe control module detected the fault condition "Particle filter holed or absent" for the Particle filter fault. Documented for the Bosch EDC16C34 injection ECU (DV6TED4 1.6 HDi) on Peugeot applications; the same PSA control units are also fitted to Citroën models.
The control module detected the fault condition "Detected absent" for the Particle filter. Documented for the Continental SID 807 injection ECU (DV6C 1.6 HDi) on Peugeot applications; the same PSA control units are also fitted to Citroën models.
The control module detected the fault condition "Detected absent" for the Particle filter. Documented for the Delphi DCM 3.5 injection ECU (DW10C 2.0 HDi) on Peugeot applications; the same PSA control units are also fitted to Citroën models.
The control module detected the fault condition "Particle filter holed or absent" for the Particle filter fault. Documented for the Siemens SID 803 injection ECU (DW10BTED4 2.0 HDi) on Peugeot applications; the same PSA control units are also fitted to Citroën models.
VAGThe control module detected an interruption (open circuit) in the Exhaust gas recirculation temperature (EGRT) sensor 2/Bank 2 circuit, so the expected electrical continuity was not present. This is the manufacturer-specific definition used by Audi.
VolvoThe control module detected a leak in the Evaporative emission system during the system leak monitor. This is the manufacturer-specific definition used by Volvo.
Motor e transmissão: motor, caixa e transmissão.
Intervalo definido pelo fabricante: o significado pode variar entre marcas.
Índice específico da avaria dentro do subsistema.
Código de avaria de diagnóstico (10 interpretações). The control module detected a fault associated with the Unable To Pull Vacuum In Tank circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Ford.
P1457 é um código específico do fabricante. Nesta base de dados está documentado para: Ford, Honda, Hyundai, Porsche, PSA, VAG, Volvo. O mesmo número pode significar outra coisa noutras marcas.
Se a lógica da avaria vive na calibração da ECU, sim: o nosso serviço DTC Removal desativa a entrada de avaria específica. A correção do checksum não está incluída: é um serviço à parte e opcional. Não sabe se o seu caso se aplica? Peça uma avaliação gratuita e os nossos engenheiros verificam o seu ficheiro.
Entenda o sistema por trás deste código: Sistema EVAP
EnglishEN
ItalianoIT
DeutschDE
EspañolES
FrançaisFR
РусскийRU