Database DTC TuningBot · v4.37.15
10 interpretazioni specifiche del costruttore su 7 costruttori nel database DTC TuningBot.
FordThe control module detected a fault associated with the Unable To Pull Vacuum In Tank circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Ford.
HondaThe control module detected a condition consistent with a leak affecting the Evaporative emission (EVAP) canister purge system (canister system). This is the manufacturer-specific definition used by Honda.
HyundaiThe control module detected improper operation of the Purge Solenoid Valve Low System. This is the manufacturer-specific definition used by Hyundai.
PorscheThe control module detected a fault associated with the A/C Compressor Control circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Porsche.
PSAThe control module detected the fault condition "Particle filter holed or absent" for the Particle filter fault. Documented for the Bosch EDC16C34 injection ECU (DV6TED4 1.6 HDi) on Peugeot applications; the same PSA control units are also fitted to Citroën models.
The control module detected the fault condition "Detected absent" for the Particle filter. Documented for the Continental SID 807 injection ECU (DV6C 1.6 HDi) on Peugeot applications; the same PSA control units are also fitted to Citroën models.
The control module detected the fault condition "Detected absent" for the Particle filter. Documented for the Delphi DCM 3.5 injection ECU (DW10C 2.0 HDi) on Peugeot applications; the same PSA control units are also fitted to Citroën models.
The control module detected the fault condition "Particle filter holed or absent" for the Particle filter fault. Documented for the Siemens SID 803 injection ECU (DW10BTED4 2.0 HDi) on Peugeot applications; the same PSA control units are also fitted to Citroën models.
VAGThe control module detected an interruption (open circuit) in the Exhaust gas recirculation temperature (EGRT) sensor 2/Bank 2 circuit, so the expected electrical continuity was not present. This is the manufacturer-specific definition used by Audi.
VolvoThe control module detected a leak in the Evaporative emission system during the system leak monitor. This is the manufacturer-specific definition used by Volvo.
Powertrain: motore, cambio e trasmissione.
Gamma definita dal costruttore: il significato può cambiare tra marche.
Indice specifico del guasto dentro il sottosistema.
Codice di errore diagnostico (10 interpretazioni). The control module detected a fault associated with the Unable To Pull Vacuum In Tank circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Ford.
P1457 è un codice specifico del costruttore. In questo database è documentato per: Ford, Honda, Hyundai, Porsche, PSA, VAG, Volvo. Lo stesso numero può significare altro su altre marche.
Se la logica del guasto vive nella calibrazione della ECU, sì: il nostro servizio DTC Removal disattiva la specifica voce di errore. La correzione del checksum non è inclusa: è un servizio a parte, opzionale. Non sei sicuro che il tuo caso rientri? Richiedi una valutazione gratuita e i nostri ingegneri controllano il tuo file.
Capire il sistema dietro questo codice: Sistema EVAP
EnglishEN
DeutschDE
EspañolES
PortuguêsPT
FrançaisFR
РусскийRU