TuningBot DTC Database · v4.37.15
9 manufacturer-specific interpretations across 8 manufacturers in the TuningBot DTC database.
ChevroletThe control module detected a fault associated with the HO2S Bank 2 Sensor 3 Lean System Or Low Voltage circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Chevrolet.
ChryslerThe control module detected a fault associated with the HO2S Bank 2 Sensor 3 Lean System Or Low Voltage circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Chrysler.
Land RoverThe control module detected improper operation of the Heated oxygen sensor (HO2S), too rich, bank 2 circuit. This is the manufacturer-specific definition used by Land Rover.
Mercedes-BenzThe control module detected improper operation of the Engine oil level switch. This is the manufacturer-specific definition used by Mercedes-Benz.
MINIThe control module detected a fault associated with the Fuel Trim Additive Per Ignition Bank 1 High circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by MINI.
NissanThe control module detected a fault associated with the Heated oxygen sensor (HO2S) 1, bank 2 - lean shift monitoring circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Nissan.
PSAThe control module detected the fault condition "The engine has not encountered the conditions to reset the injector dead times (Rail pressure low)" for the Injectors control. Documented for the Delphi DCM 3.5 injection ECU (DW10C 2.0 HDi) on Peugeot applications; the same PSA control units are also fitted to Citroën models.
VAGThe control module detected an interruption (open circuit) in the Fuel temperature circuit, so the expected electrical continuity was not present. This is the manufacturer-specific definition used by Audi.
The control module detected a short circuit to battery voltage in the Fuel Temp Sensor (G81): Open or circuit. This is the manufacturer-specific definition used by Volkswagen. Volkswagen Group tools also report it as fault code 17571. Documented across Volkswagen Group applications (Audi, SEAT and Škoda included).
Powertrain: engine, transmission and driveline systems.
Manufacturer-defined range: the meaning can differ between brands.
Specific fault index within the subsystem.
Diagnostic Trouble Code (9 interpretations). The control module detected a fault associated with the HO2S Bank 2 Sensor 3 Lean System Or Low Voltage circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Chevrolet.
P1163 is a manufacturer-specific code. In this database it is documented for: Chevrolet, Chrysler, Land Rover, Mercedes-Benz, MINI, Nissan, PSA, VAG. The same number can mean something different on other brands.
If the fault logic lives in the ECU calibration, yes: our DTC Removal file service disables the specific fault entry. Checksum correction is not included: it is a separate, optional service. Not sure whether your case qualifies? Request a free assessment and our engineers will check your ECU file.
Understand the system behind this code: Oxygen Sensors (Lambda)
ItalianoIT
DeutschDE
EspañolES
PortuguêsPT
FrançaisFR
РусскийRU