The control module detected a fault associated with the HO2S Bank 2 Sensor 3 Lean System Or Low Voltage circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Chevrolet.
Database DTC TuningBot · v4.37.15
P1163 Codice di errore diagnostico (9 interpretazioni)
9 interpretazioni specifiche del costruttore su 8 costruttori nel database DTC TuningBot.
Chevrolet
1 interpretazione
Chrysler
1 interpretazioneThe control module detected a fault associated with the HO2S Bank 2 Sensor 3 Lean System Or Low Voltage circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Chrysler.
Controlli consigliati
- Perform a full module scan
- Review freeze-frame and occurrence data
- Confirm the exact vehicle, ECU and software context
- Inspect relevant wiring and connectors
- Check applicable OEM service information
Land Rover
1 interpretazioneThe control module detected improper operation of the Heated oxygen sensor (HO2S), too rich, bank 2 circuit. This is the manufacturer-specific definition used by Land Rover.
Possibili cause
- Wiring
- H025
- ECM
Mercedes-Benz
1 interpretazioneThe control module detected improper operation of the Engine oil level switch. This is the manufacturer-specific definition used by Mercedes-Benz.
Possibili cause
- Wiring
- engine oil level switch
- ECM
MINI
1 interpretazioneThe control module detected a fault associated with the Fuel Trim Additive Per Ignition Bank 1 High circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by MINI.
Nissan
1 interpretazioneThe control module detected a fault associated with the Heated oxygen sensor (HO2S) 1, bank 2 - lean shift monitoring circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Nissan.
Possibili cause
- Wiring
- HO2S
- fuel system
- injector
- air leak
- ECM
PSA
1 interpretazioneThe control module detected the fault condition "The engine has not encountered the conditions to reset the injector dead times (Rail pressure low)" for the Injectors control. Documented for the Delphi DCM 3.5 injection ECU (DW10C 2.0 HDi) on Peugeot applications; the same PSA control units are also fitted to Citroën models.
VAG
2 interpretazioniThe control module detected an interruption (open circuit) in the Fuel temperature circuit, so the expected electrical continuity was not present. This is the manufacturer-specific definition used by Audi.
Possibili cause
- Wiring open circuit/short to positive
- fuel temperature sensor
The control module detected a short circuit to battery voltage in the Fuel Temp Sensor (G81): Open or circuit. This is the manufacturer-specific definition used by Volkswagen. Volkswagen Group tools also report it as fault code 17571. Documented across Volkswagen Group applications (Audi, SEAT and Škoda included).
Sintomi
- Fuel consumption higher then normal
- Starting the engine is not as easy as normal
- Emission Levels not met
Possibili cause
- Wiring/Connectors from/to Fuel Temp Sensor (G81) faulty
- Fuel Temp Sensor (G81) faulty
Controlli consigliati
- Check Wiring/Connectors from/to Fuel Temp Sensor (G81)
- Check Fuel Temp Sensor (G81)
Codici correlati e vicini
Come si legge P1163
Powertrain: motore, cambio e trasmissione.
Gamma definita dal costruttore: il significato può cambiare tra marche.
Indice specifico del guasto dentro il sottosistema.
Domande frequenti su P1163
Cosa significa P1163?
Codice di errore diagnostico (9 interpretazioni). The control module detected a fault associated with the HO2S Bank 2 Sensor 3 Lean System Or Low Voltage circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Chevrolet.
P1163 è generico o specifico del costruttore?
P1163 è un codice specifico del costruttore. In questo database è documentato per: Chevrolet, Chrysler, Land Rover, Mercedes-Benz, MINI, Nissan, PSA, VAG. Lo stesso numero può significare altro su altre marche.
TuningBot può rimuovere P1163 a livello di file?
Se la logica del guasto vive nella calibrazione della ECU, sì: il nostro servizio DTC Removal disattiva la specifica voce di errore. La correzione del checksum non è inclusa: è un servizio a parte, opzionale. Non sei sicuro che il tuo caso rientri? Richiedi una valutazione gratuita e i nostri ingegneri controllano il tuo file.
Altri servizi sul file
Capire il sistema dietro questo codice: Sonde lambda
