Öffnungszeiten: täglich 07–23 Uhr

TuningBot DTC-Datenbank · v4.37.15

P1498 Diagnose-Fehlercode (9 Interpretationen)

9 herstellerspezifische Interpretationen bei 8 Herstellern in der TuningBot DTC-Datenbank.

P · AntriebsstrangDriver_assistanceOBD2

BMW

1 Interpretation
P1498
Cruise control module self - test - internal fault BMW · driver_assistance Datenzuverlässigkeit 62%

The control module registered the fault condition described as "Cruise control module self - test - internal fault". This is the manufacturer-specific definition used by BMW.

Mögliche Ursachen

  • CAN module
  • cruise control module
  • ECM

Chrysler

1 Interpretation
P1498
High Speed Radiator Relay Ground Control Conditions Chrysler · thermal_management Datenzuverlässigkeit 62%

The control module detected a fault associated with the High Speed Radiator Relay Ground Control Conditions circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Chrysler.

Honda

1 Interpretation
P1498
Exhaust gas recirculation (EGR) valve position sensor - voltage high Honda · emissions Datenzuverlässigkeit 80%

The control module detected that the Exhaust gas recirculation (EGR) valve position voltage stayed above the expected range. This is the manufacturer-specific definition used by Honda.

Mögliche Ursachen

  • Wiring
  • EGR valve/position sensor
  • ECM programming
  • ECM

Mazda

1 Interpretation
P1498
Exhaust gas recirculation (EGR) valve coil 3 - short/open circuit Mazda · emissions Datenzuverlässigkeit 62%

The control module detected an interruption (open circuit) in the Exhaust gas recirculation (EGR) valve coil 3 - short/ circuit, so the expected electrical continuity was not present. This is the manufacturer-specific definition used by Mazda.

Mögliche Ursachen

  • Wiring
  • EGR valve
  • ECM

MINI

1 Interpretation
P1498
Unmetered Air After Compressor MINI · engine Datenzuverlässigkeit 62%

The control module detected a fault associated with the Unmetered Air After Compressor circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by MINI.

PSA

2 Interpretationen
P1498
Air mixer : Incorrect position (closed too far) (After sales) PSA · engine Datenzuverlässigkeit 72%

The control module detected the fault condition "Incorrect position (closed too far) (After sales)" for the Air mixer. Documented for the Continental SID 807 injection ECU (DV6C 1.6 HDi) on Peugeot applications; the same PSA control units are also fitted to Citroën models.

Gilt für Peugeot Continental SID 807 injection ECU (DV6C 1.6 HDi)
P1498
Air mixer : Position incorrect (Closed too far) (APV) PSA · engine Datenzuverlässigkeit 72%

The control module detected the fault condition "Position incorrect (Closed too far) (APV)" for the Air mixer. Documented for the Delphi DCM 3.5 injection ECU (DW10C 2.0 HDi) on Peugeot applications; the same PSA control units are also fitted to Citroën models.

Gilt für Peugeot Delphi DCM 3.5 injection ECU (DW10C 2.0 HDi)

Subaru

1 Interpretation
P1498
Exhaust gas recirculation (EGR) solenoid valve - signal 4 - voltage low Subaru · emissions Datenzuverlässigkeit 62%

The control module detected that the Exhaust gas recirculation (EGR) solenoid valve - signal 4 voltage stayed below the expected range. This is the manufacturer-specific definition used by Subaru.

Mögliche Ursachen

  • Wiring
  • EGR solenoid valve

VAG

1 Interpretation
P1498
Secondary Air System Bank 4 Flow Fault VAG · emissions Datenzuverlässigkeit 62%

The control module registered the fault condition described as "Secondary Air System Bank 4 Flow Fault". This is the manufacturer-specific definition used by Volkswagen.

Gilt für Volkswagen

Verwandte und benachbarte Codes

So liest man P1498

P

Antriebsstrang: Motor, Getriebe und Antrieb.

1

Herstellerdefinierter Bereich: die Bedeutung kann je Marke abweichen.

498

Spezifischer Fehlerindex innerhalb des Subsystems.

Häufige Fragen zu P1498

Was bedeutet P1498?

Diagnose-Fehlercode (9 Interpretationen). The control module registered the fault condition described as "Cruise control module self - test - internal fault". This is the manufacturer-specific definition used by BMW.

Ist P1498 generisch oder herstellerspezifisch?

P1498 ist ein herstellerspezifischer Code. In dieser Datenbank ist er dokumentiert für: BMW, Chrysler, Honda, Mazda, MINI, PSA, Subaru, VAG. Dieselbe Nummer kann bei anderen Marken etwas anderes bedeuten.

Kann TuningBot P1498 auf Dateiebene entfernen?

Wenn die Fehlerlogik in der Steuergerätekalibrierung liegt, ja: unser DTC-Removal-Dienst deaktiviert den konkreten Fehlereintrag. Die Checksum-Korrektur ist nicht enthalten: Sie ist ein separater, optionaler Service. Unsicher, ob Ihr Fall dazugehört? Fordern Sie eine kostenlose Einschätzung an, und unsere Ingenieure prüfen Ihre Datei.

Weitere Dateidienste

ChiptuningPrüfstandsergebnisse nach Modell und Motor Ergebnisse ansehen →

← Die gesamte DTC-Datenbank durchsuchen