Heures : 07h–23h tous les jours

Base de données DTC TuningBot · v4.37.15

P1586 Code défaut de diagnostic (11 interprétations)

11 interprétations spécifiques au constructeur chez 7 constructeurs dans la base DTC TuningBot.

P · Groupe motopropulseurSoftwareOBD2

BMW

1 interprétation
P1586
WT control module, bank 1 - internal fault BMW · software Fiabilité de la donnée 62%

The control module registered the fault condition described as "WT control module, bank 1 - internal fault". This is the manufacturer-specific definition used by BMW.

Causes possibles

VVT control module

Chevrolet

1 interprétation
P1586
Cruise control system. brake switch 2 - circuit malfunction Chevrolet · driver_assistance Fiabilité de la donnée 80%

The control module detected improper operation of the Cruise control system. brake switch 2 circuit. This is the manufacturer-specific definition used by Chevrolet.

Causes possibles

  • Wiring
  • poor connections
  • BPP switch

Chrysler

1 interprétation
P1586
Cruise Control Brake Switch 2 Circuit Chrysler · driver_assistance Fiabilité de la donnée 62%

The control module detected improper operation of the Cruise Control Brake Switch 2 circuit. This is the manufacturer-specific definition used by Chrysler.

Vérifications recommandées

  • Perform a full module scan
  • Review freeze-frame and occurrence data
  • Confirm the exact vehicle, ECU and software context
  • Inspect relevant wiring and connectors
  • Check applicable OEM service information

Ford

1 interprétation
P1586
Throttle Control Unit Throttle Position Malfunction Ford · engine Fiabilité de la donnée 80%

The control module detected improper operation of the Throttle Control Unit Throttle Position. This is the manufacturer-specific definition used by Ford.

Honda

1 interprétation
P1586
Brake fluid pressure sensor A/B - circuit malfunction Honda · engine Fiabilité de la donnée 62%

The control module detected improper operation of the Brake fluid pressure sensor A/B circuit. This is the manufacturer-specific definition used by Honda.

Causes possibles

  • Brake fluid pressure sensor(s)
  • ECM programming
  • ECM

PSA

4 interprétations
P1586
Supply of the rail pressure sensor, the flowmeter and the EGR valve copy : Supply voltage too low PSA · emissions Fiabilité de la donnée 72%

The control module detected that the Supply of the rail pressure sensor, the flowmeter and the EGR valve copy was below its expected limit. Documented for the Bosch EDC16C34 injection ECU (DV6TED4 1.6 HDi) on Peugeot applications; the same PSA control units are also fitted to Citroën models.

S'applique à Peugeot Bosch EDC16C34 injection ECU (DV6TED4 1.6 HDi)
P1586
Fuel high pressure sensor supply (5V) fault : Short circuit to earth or to positive PSA · engine Fiabilité de la donnée 72%

The control module detected a short circuit to ground in the Fuel high pressure sensor supply (5V) fault circuit. Documented for the Bosch MED 17.4.x engine ECU (EP6 THP family) on Peugeot applications; the same PSA control units are also fitted to Citroën models.

S'applique à Peugeot Bosch MED 17.4.x engine ECU (EP6 THP family)
P1586
Sensors 5 volts supply fault : Cylinder reference sensor / Variable valve position sensor : Short circuit to earth / Short circuit - to positive PSA · engine Fiabilité de la donnée 72%

The control module detected a short circuit to ground in the Sensors 5 volts supply fault circuit. Documented for the Bosch MEV17.4 engine ECU (EP6 1.6 VTi) on Peugeot applications; the same PSA control units are also fitted to Citroën models.

S'applique à Peugeot Bosch MEV17.4 engine ECU (EP6 1.6 VTi)
P1586
Gearbox actuator position sensors supply fault : Short circuit to earth PSA · transmission Fiabilité de la donnée 72%

The control module detected a short circuit to ground in the Gearbox actuator position sensors supply fault circuit. Documented for the MCP 6-speed piloted manual gearbox ECU on Peugeot applications; the same PSA control units are also fitted to Citroën models.

S'applique à Peugeot MCP 6-speed piloted manual gearbox ECU

VAG

2 interprétations
P1586
Engine mounting control solenoid, Bank 1 & 2 - short to positive VAG · engine Fiabilité de la donnée 62%

The control module detected a short circuit to battery voltage in the Engine mounting control solenoid, Bank 1 & 2 circuit. This is the manufacturer-specific definition used by Audi.

Causes possibles

  • Wiring short to positive
  • engine mounting control solenoid
S'applique à Audi
P1586
Engine Mount Solenoid Valves (N144/N145): Short to Plus VAG · engine Fiabilité de la donnée 84%

The control module detected a short circuit to battery voltage in the Engine Mount Solenoid Valves (N144/N145) circuit. This is the manufacturer-specific definition used by Volkswagen. Volkswagen Group tools also report it as fault code 17994. Documented across Volkswagen Group applications (Audi, SEAT and Škoda included).

Causes possibles

  • Wiring/Connectors from/to Engine Mount Solenoid Valves (N144/N145) faulty
  • Engine Mount Solenoid Valves (N144/N145) faulty

Vérifications recommandées

  • Check Wiring/Connectors from/to Engine Mount Solenoid Valves (N144/N145)
  • Check Engine Mount Solenoid Valves (N144/N145)
S'applique à Volkswagen

Codes liés et voisins

Comment lire P1586

P

Groupe motopropulseur : moteur, boîte et transmission.

1

Plage définie par le constructeur : la signification peut varier selon les marques.

586

Index de défaut spécifique dans le sous-système.

Questions fréquentes sur P1586

Que signifie P1586 ?

Code défaut de diagnostic (11 interprétations). The control module registered the fault condition described as "WT control module, bank 1 - internal fault". This is the manufacturer-specific definition used by BMW.

P1586 est-il générique ou spécifique au constructeur ?

P1586 est un code spécifique au constructeur. Dans cette base il est documenté pour : BMW, Chevrolet, Chrysler, Ford, Honda, PSA, VAG. Le même numéro peut signifier autre chose sur d'autres marques.

TuningBot peut-il supprimer P1586 au niveau du fichier ?

Si la logique du défaut réside dans la calibration de l'ECU, oui : notre service DTC Removal désactive l'entrée de défaut concernée. La correction du checksum n'est pas incluse : c'est un service à part, en option. Vous ne savez pas si votre cas est concerné ? Demandez une évaluation gratuite et nos ingénieurs examineront votre fichier.

Autres services fichier

ReprogrammationRésultats mesurés au banc, par modèle et moteur Voir les résultats →

← Rechercher dans toute la base DTC