Horario: 07–23 todos los días

Base de datos DTC de TuningBot · v4.37.15

P1586 Código de avería diagnóstico (11 interpretaciones)

11 interpretaciones específicas del fabricante en 7 fabricantes, en la base de datos DTC de TuningBot.

P · Motor y transmisiónSoftwareOBD2

BMW

1 interpretación
P1586
WT control module, bank 1 - internal fault BMW · software Fiabilidad del dato 62%

The control module registered the fault condition described as "WT control module, bank 1 - internal fault". This is the manufacturer-specific definition used by BMW.

Posibles causas

VVT control module

Chevrolet

1 interpretación
P1586
Cruise control system. brake switch 2 - circuit malfunction Chevrolet · driver_assistance Fiabilidad del dato 80%

The control module detected improper operation of the Cruise control system. brake switch 2 circuit. This is the manufacturer-specific definition used by Chevrolet.

Posibles causas

  • Wiring
  • poor connections
  • BPP switch

Chrysler

1 interpretación
P1586
Cruise Control Brake Switch 2 Circuit Chrysler · driver_assistance Fiabilidad del dato 62%

The control module detected improper operation of the Cruise Control Brake Switch 2 circuit. This is the manufacturer-specific definition used by Chrysler.

Comprobaciones recomendadas

  • Perform a full module scan
  • Review freeze-frame and occurrence data
  • Confirm the exact vehicle, ECU and software context
  • Inspect relevant wiring and connectors
  • Check applicable OEM service information

Ford

1 interpretación
P1586
Throttle Control Unit Throttle Position Malfunction Ford · engine Fiabilidad del dato 80%

The control module detected improper operation of the Throttle Control Unit Throttle Position. This is the manufacturer-specific definition used by Ford.

Honda

1 interpretación
P1586
Brake fluid pressure sensor A/B - circuit malfunction Honda · engine Fiabilidad del dato 62%

The control module detected improper operation of the Brake fluid pressure sensor A/B circuit. This is the manufacturer-specific definition used by Honda.

Posibles causas

  • Brake fluid pressure sensor(s)
  • ECM programming
  • ECM

PSA

4 interpretaciones
P1586
Supply of the rail pressure sensor, the flowmeter and the EGR valve copy : Supply voltage too low PSA · emissions Fiabilidad del dato 72%

The control module detected that the Supply of the rail pressure sensor, the flowmeter and the EGR valve copy was below its expected limit. Documented for the Bosch EDC16C34 injection ECU (DV6TED4 1.6 HDi) on Peugeot applications; the same PSA control units are also fitted to Citroën models.

Se aplica a Peugeot Bosch EDC16C34 injection ECU (DV6TED4 1.6 HDi)
P1586
Fuel high pressure sensor supply (5V) fault : Short circuit to earth or to positive PSA · engine Fiabilidad del dato 72%

The control module detected a short circuit to ground in the Fuel high pressure sensor supply (5V) fault circuit. Documented for the Bosch MED 17.4.x engine ECU (EP6 THP family) on Peugeot applications; the same PSA control units are also fitted to Citroën models.

Se aplica a Peugeot Bosch MED 17.4.x engine ECU (EP6 THP family)
P1586
Sensors 5 volts supply fault : Cylinder reference sensor / Variable valve position sensor : Short circuit to earth / Short circuit - to positive PSA · engine Fiabilidad del dato 72%

The control module detected a short circuit to ground in the Sensors 5 volts supply fault circuit. Documented for the Bosch MEV17.4 engine ECU (EP6 1.6 VTi) on Peugeot applications; the same PSA control units are also fitted to Citroën models.

Se aplica a Peugeot Bosch MEV17.4 engine ECU (EP6 1.6 VTi)
P1586
Gearbox actuator position sensors supply fault : Short circuit to earth PSA · transmission Fiabilidad del dato 72%

The control module detected a short circuit to ground in the Gearbox actuator position sensors supply fault circuit. Documented for the MCP 6-speed piloted manual gearbox ECU on Peugeot applications; the same PSA control units are also fitted to Citroën models.

Se aplica a Peugeot MCP 6-speed piloted manual gearbox ECU

VAG

2 interpretaciones
P1586
Engine mounting control solenoid, Bank 1 & 2 - short to positive VAG · engine Fiabilidad del dato 62%

The control module detected a short circuit to battery voltage in the Engine mounting control solenoid, Bank 1 & 2 circuit. This is the manufacturer-specific definition used by Audi.

Posibles causas

  • Wiring short to positive
  • engine mounting control solenoid
Se aplica a Audi
P1586
Engine Mount Solenoid Valves (N144/N145): Short to Plus VAG · engine Fiabilidad del dato 84%

The control module detected a short circuit to battery voltage in the Engine Mount Solenoid Valves (N144/N145) circuit. This is the manufacturer-specific definition used by Volkswagen. Volkswagen Group tools also report it as fault code 17994. Documented across Volkswagen Group applications (Audi, SEAT and Škoda included).

Posibles causas

  • Wiring/Connectors from/to Engine Mount Solenoid Valves (N144/N145) faulty
  • Engine Mount Solenoid Valves (N144/N145) faulty

Comprobaciones recomendadas

  • Check Wiring/Connectors from/to Engine Mount Solenoid Valves (N144/N145)
  • Check Engine Mount Solenoid Valves (N144/N145)
Se aplica a Volkswagen

Códigos relacionados y cercanos

Cómo se lee P1586

P

Motor y transmisión: motor, cambio y transmisión.

1

Rango definido por el fabricante: el significado puede variar entre marcas.

586

Índice específico del fallo dentro del subsistema.

Preguntas frecuentes sobre P1586

¿Qué significa P1586?

Código de avería diagnóstico (11 interpretaciones). The control module registered the fault condition described as "WT control module, bank 1 - internal fault". This is the manufacturer-specific definition used by BMW.

¿P1586 es genérico o específico del fabricante?

P1586 es un código específico del fabricante. En esta base de datos está documentado para: BMW, Chevrolet, Chrysler, Ford, Honda, PSA, VAG. El mismo número puede significar otra cosa en otras marcas.

¿Puede TuningBot eliminar P1586 a nivel de archivo?

Si la lógica del fallo vive en la calibración de la ECU, sí: nuestro servicio DTC Removal desactiva la entrada de fallo concreta. La corrección del checksum no está incluida: es un servicio aparte y opcional. ¿No sabes si tu caso encaja? Solicita una valoración gratuita y nuestros ingenieros revisarán tu archivo.

Otros servicios de archivo

ReprogramaciónResultados medidos en banco, por modelo y motor Ver los resultados →

← Buscar en toda la base de datos DTC