Horario: 07–23 todos los días

Base de datos DTC de TuningBot · v4.37.15

P1377 Código de avería diagnóstico (4 interpretaciones)

4 interpretaciones específicas del fabricante en 3 fabricantes, en la base de datos DTC de TuningBot.

P · Motor y transmisiónEngineOBD2
Páginas por marca:BMWChryslerVAG

BMW

1 interpretación
P1377
MS40/41/42/46/M5. 2: Inlet camshaft control system, end position - plausibility BMW · engine Fiabilidad del dato 62%

The control module detected that related sensor signals for MS40/41/42/46/M5. 2: Inlet camshaft control system, end position did not agree with each other (correlation/plausibility fault). This is the manufacturer-specific definition used by BMW.

Posibles causas

  • Wiring
  • connector
  • camshaft position (CMP) sensor
  • crankshaft position (CKP) sensor
  • ECM

Chrysler

1 interpretación
P1377
IC Module CAM Pulse To 4X Reference Pulse Comparison Chrysler · engine Fiabilidad del dato 62%

The control module detected a fault associated with the IC Module CAM Pulse To 4X Reference Pulse Comparison circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Chrysler.

Comprobaciones recomendadas

  • Perform a full module scan
  • Review freeze-frame and occurrence data
  • Confirm the exact vehicle, ECU and software context
  • Inspect relevant wiring and connectors
  • Check applicable OEM service information

VAG

2 interpretaciones
P1377
Ignition coil/amplifier, cylinder 8 - short to positive VAG · ignition Fiabilidad del dato 62%

The control module detected a short circuit to battery voltage in the Ignition coil/amplifier, cylinder 8 circuit. This is the manufacturer-specific definition used by Audi.

Posibles causas

  • Wiring short to positive
  • ignition coil/ amplifier
Se aplica a Audi
P1377
Cylinder 8 Ignition Circuit Short To B+ VAG · engine Fiabilidad del dato 80%

The control module detected a short circuit to battery voltage in the Cylinder 8 Ignition circuit. This is the manufacturer-specific definition used by Volkswagen.

Se aplica a Volkswagen

Códigos relacionados y cercanos

Cómo se lee P1377

P

Motor y transmisión: motor, cambio y transmisión.

1

Rango definido por el fabricante: el significado puede variar entre marcas.

377

Índice específico del fallo dentro del subsistema.

Preguntas frecuentes sobre P1377

¿Qué significa P1377?

Código de avería diagnóstico (4 interpretaciones). The control module detected that related sensor signals for MS40/41/42/46/M5. 2: Inlet camshaft control system, end position did not agree with each other (correlation/plausibility fault). This is the manufacturer-specific definition used by BMW.

¿P1377 es genérico o específico del fabricante?

P1377 es un código específico del fabricante. En esta base de datos está documentado para: BMW, Chrysler, VAG. El mismo número puede significar otra cosa en otras marcas.

¿Puede TuningBot eliminar P1377 a nivel de archivo?

Si la lógica del fallo vive en la calibración de la ECU, sí: nuestro servicio DTC Removal desactiva la entrada de fallo concreta. La corrección del checksum no está incluida: es un servicio aparte y opcional. ¿No sabes si tu caso encaja? Solicita una valoración gratuita y nuestros ingenieros revisarán tu archivo.

Otros servicios de archivo

ReprogramaciónResultados medidos en banco, por modelo y motor Ver los resultados →

← Buscar en toda la base de datos DTC