Horario: 07–23 todos los días

Base de datos DTC de TuningBot · v4.40.3

P1369 Código de avería diagnóstico (7 interpretaciones)

7 interpretaciones específicas del fabricante en 3 fabricantes, en la base de datos DTC de TuningBot.

P · Motor y transmisiónGestión del motorOBD2
Páginas por marca:FordPSAVAG

Ford

1 interpretación
P1369
Engine Temperature Light Monitor Failure Ford · gestión del motor Fiabilidad del dato 80%

The control module detected improper operation of the Engine Temperature Light Monitor circuit. This is the manufacturer-specific definition used by Ford.

PSA

4 interpretaciones
P1369
Control of injector for cylinder n°4 : Injector voltage too low PSA · sistema de combustible Fiabilidad del dato 72%

The control module detected that the Control of injector for cylinder n°4 was below its expected limit. Documented for the Bosch EDC16C34 injection ECU (DV6TED4 1.6 HDi) on Peugeot applications; the same PSA control units are also fitted to Citroën models.

Se aplica a Peugeot Bosch EDC16C34 injection ECU (DV6TED4 1.6 HDi)
P1369
Injector 4 control : Electrical specifications outside the norms (harness or injector) PSA · sistema de combustible Fiabilidad del dato 72%

The control module detected the fault condition "Electrical specifications outside the norms (harness or injector)" for the Injector 4 control. Documented for the Continental SID 807 injection ECU (DV6C 1.6 HDi) on Peugeot applications; the same PSA control units are also fitted to Citroën models.

Se aplica a Peugeot Continental SID 807 injection ECU (DV6C 1.6 HDi)
P1369
Injector 4 control : Electrical characteristics outside the standards (Harness or injector) PSA · sistema de combustible Fiabilidad del dato 72%

The control module detected the fault condition "Electrical characteristics outside the standards (Harness or injector)" for the Injector 4 control. Documented for the Delphi DCM 3.5 injection ECU (DW10C 2.0 HDi) on Peugeot applications; the same PSA control units are also fitted to Citroën models.

Se aplica a Peugeot Delphi DCM 3.5 injection ECU (DW10C 2.0 HDi)
P1369
Control of injector for cylinder n°4 : Injector voltage too low PSA · sistema de combustible Fiabilidad del dato 72%

The control module detected that the Control of injector for cylinder n°4 was below its expected limit. Documented for the Siemens SID 803 injection ECU (DW10BTED4 2.0 HDi) on Peugeot applications; the same PSA control units are also fitted to Citroën models.

Se aplica a Peugeot Siemens SID 803 injection ECU (DW10BTED4 2.0 HDi)

VAG

2 interpretaciones
P1369
Ignition coil/amplifier, cylinder 5 - short to ground VAG · encendido Fiabilidad del dato 62%

The control module detected a short circuit to ground in the Ignition coil/amplifier, cylinder 5 circuit. This is the manufacturer-specific definition used by Audi.

Posibles causas

  • Wiring short to ground
  • ignition coil/ amplifier
Se aplica a Audi
P1369
Ignition coil/amplifier, cylinder 5 - short to ground VAG · encendido Fiabilidad del dato 80%

The control module detected a short circuit to ground in the Ignition coil/amplifier, cylinder 5 circuit. This is the manufacturer-specific definition used by Volkswagen.

Posibles causas

  • Wiring short to ground
  • ignition coil/ amplifier
Se aplica a Volkswagen

Códigos relacionados y cercanos

Cómo se lee P1369

P

Motor y transmisión: motor, cambio y transmisión.

1

Rango definido por el fabricante: el significado puede variar entre marcas.

369

Índice específico del fallo dentro del subsistema.

Preguntas frecuentes sobre P1369

¿Qué significa P1369?

Código de avería diagnóstico (7 interpretaciones). The control module detected improper operation of the Engine Temperature Light Monitor circuit. This is the manufacturer-specific definition used by Ford.

¿P1369 es genérico o específico del fabricante?

P1369 es un código específico del fabricante. En esta base de datos está documentado para: Ford, PSA, VAG. El mismo número puede significar otra cosa en otras marcas.

¿Puede TuningBot eliminar P1369 a nivel de archivo?

Si la lógica del fallo vive en la calibración de la ECU, sí: nuestro servicio DTC Removal desactiva la entrada de fallo concreta. La corrección del checksum no está incluida: es un servicio aparte y opcional. ¿No sabes si tu caso encaja? Solicita una valoración gratuita y nuestros ingenieros revisarán tu archivo.

Otros servicios de archivo

ReprogramaciónResultados medidos en banco, por modelo y motor Ver los resultados →

← Buscar en toda la base de datos DTC