The control module detected a fault associated with the #7 MF Signal Line Short circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Hyundai.
Base de datos DTC de TuningBot · v4.37.15
P1337 Código de avería diagnóstico (7 interpretaciones)
7 interpretaciones específicas del fabricante en 4 fabricantes, en la base de datos DTC de TuningBot.
Hyundai
1 interpretación
Mercedes-Benz
1 interpretaciónThe control module detected a fault associated with the Engine control module (ECM), RPM signal - output circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Mercedes-Benz.
Posibles causas
- Wiring
- RPM sensor
- ECM
PSA
3 interpretacionesThe stored code identifies a fault of the Misfiring fault on cylinders 1. Documented for the Bosch MED 17.4.x engine ECU (EP6 THP family) on Peugeot applications; the same PSA control units are also fitted to Citroën models. PSA documentation does not characterise the failure mode further.
The stored code identifies a fault of the Fault. Documented for the Bosch MEV17.4 engine ECU (EP6 1.6 VTi) on Peugeot applications; the same PSA control units are also fitted to Citroën models. PSA documentation does not characterise the failure mode further.
The stored code identifies a fault of the High combustion misfiring on cylinder 1. Documented for the Magneti Marelli MM6KP engine ECU (EW7A/EW10A) on Peugeot applications; the same PSA control units are also fitted to Citroën models. PSA documentation does not characterise the failure mode further.
VAG
2 interpretacionesThe control module detected a short circuit to ground in the Camshaft position (CMP) sensor, Bank 1 circuit. This is the manufacturer-specific definition used by Audi.
Posibles causas
- Wiring short to ground
- CMP sensor
The control module detected a fault associated with the Camshaft Position Sensor (G40) circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Volkswagen. Volkswagen Group tools also report it as fault code 17745. Documented stored variants include: Short to Ground. Documented across Volkswagen Group applications (Audi, SEAT and Škoda included).
Síntomas
Malfunction Indicator Lamp (MIL) active
Posibles causas
- Camshaft Position Sensor (G40) faulty
- Wiring/Connectors from/to Camshaft Position Sensor (G40) faulty
Comprobaciones recomendadas
- Check Camshaft Adjustment
- Check Camshaft Position Sensor (G40)
- Check Wiring/Connectors from/to Camshaft Position Sensor (G40)
Códigos relacionados y cercanos
Cómo se lee P1337
Motor y transmisión: motor, cambio y transmisión.
Rango definido por el fabricante: el significado puede variar entre marcas.
Índice específico del fallo dentro del subsistema.
Preguntas frecuentes sobre P1337
¿Qué significa P1337?
Código de avería diagnóstico (7 interpretaciones). The control module detected a fault associated with the #7 MF Signal Line Short circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Hyundai.
¿P1337 es genérico o específico del fabricante?
P1337 es un código específico del fabricante. En esta base de datos está documentado para: Hyundai, Mercedes-Benz, PSA, VAG. El mismo número puede significar otra cosa en otras marcas.
¿Puede TuningBot eliminar P1337 a nivel de archivo?
Si la lógica del fallo vive en la calibración de la ECU, sí: nuestro servicio DTC Removal desactiva la entrada de fallo concreta. La corrección del checksum no está incluida: es un servicio aparte y opcional. ¿No sabes si tu caso encaja? Solicita una valoración gratuita y nuestros ingenieros revisarán tu archivo.
Otros servicios de archivo
Entender el sistema detrás de este código: Estrategia de diagnóstico y lógica DTC
