The control module detected a fault associated with the #7 MF Signal Line Short circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Hyundai.
TuningBot DTC-Datenbank · v4.37.15
P1337 Diagnose-Fehlercode (7 Interpretationen)
7 herstellerspezifische Interpretationen bei 4 Herstellern in der TuningBot DTC-Datenbank.
Hyundai
1 Interpretation
Mercedes-Benz
1 InterpretationThe control module detected a fault associated with the Engine control module (ECM), RPM signal - output circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Mercedes-Benz.
Mögliche Ursachen
- Wiring
- RPM sensor
- ECM
PSA
3 InterpretationenThe stored code identifies a fault of the Misfiring fault on cylinders 1. Documented for the Bosch MED 17.4.x engine ECU (EP6 THP family) on Peugeot applications; the same PSA control units are also fitted to Citroën models. PSA documentation does not characterise the failure mode further.
The stored code identifies a fault of the Fault. Documented for the Bosch MEV17.4 engine ECU (EP6 1.6 VTi) on Peugeot applications; the same PSA control units are also fitted to Citroën models. PSA documentation does not characterise the failure mode further.
The stored code identifies a fault of the High combustion misfiring on cylinder 1. Documented for the Magneti Marelli MM6KP engine ECU (EW7A/EW10A) on Peugeot applications; the same PSA control units are also fitted to Citroën models. PSA documentation does not characterise the failure mode further.
VAG
2 InterpretationenThe control module detected a short circuit to ground in the Camshaft position (CMP) sensor, Bank 1 circuit. This is the manufacturer-specific definition used by Audi.
Mögliche Ursachen
- Wiring short to ground
- CMP sensor
The control module detected a fault associated with the Camshaft Position Sensor (G40) circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Volkswagen. Volkswagen Group tools also report it as fault code 17745. Documented stored variants include: Short to Ground. Documented across Volkswagen Group applications (Audi, SEAT and Škoda included).
Symptome
Malfunction Indicator Lamp (MIL) active
Mögliche Ursachen
- Camshaft Position Sensor (G40) faulty
- Wiring/Connectors from/to Camshaft Position Sensor (G40) faulty
Empfohlene Prüfungen
- Check Camshaft Adjustment
- Check Camshaft Position Sensor (G40)
- Check Wiring/Connectors from/to Camshaft Position Sensor (G40)
Verwandte und benachbarte Codes
So liest man P1337
Antriebsstrang: Motor, Getriebe und Antrieb.
Herstellerdefinierter Bereich: die Bedeutung kann je Marke abweichen.
Spezifischer Fehlerindex innerhalb des Subsystems.
Häufige Fragen zu P1337
Was bedeutet P1337?
Diagnose-Fehlercode (7 Interpretationen). The control module detected a fault associated with the #7 MF Signal Line Short circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Hyundai.
Ist P1337 generisch oder herstellerspezifisch?
P1337 ist ein herstellerspezifischer Code. In dieser Datenbank ist er dokumentiert für: Hyundai, Mercedes-Benz, PSA, VAG. Dieselbe Nummer kann bei anderen Marken etwas anderes bedeuten.
Kann TuningBot P1337 auf Dateiebene entfernen?
Wenn die Fehlerlogik in der Steuergerätekalibrierung liegt, ja: unser DTC-Removal-Dienst deaktiviert den konkreten Fehlereintrag. Die Checksum-Korrektur ist nicht enthalten: Sie ist ein separater, optionaler Service. Unsicher, ob Ihr Fall dazugehört? Fordern Sie eine kostenlose Einschätzung an, und unsere Ingenieure prüfen Ihre Datei.
Weitere Dateidienste
Das System hinter diesem Code verstehen: Diagnosestrategie und DTC-Logik
