Horario: 07–23 todos los días

Base de datos DTC de TuningBot · v4.37.15

P1108 Código de avería diagnóstico (10 interpretaciones)

10 interpretaciones específicas del fabricante en 10 fabricantes, en la base de datos DTC de TuningBot.

P · Motor y transmisiónEngineOBD2

Chrysler

1 interpretación
P1108
BARO To MAP Sensor Circuit Comparison Too High Chrysler · engine Fiabilidad del dato 62%

The control module detected that the BARO To MAP Sensor Circuit Comparison value was above the expected limit. This is the manufacturer-specific definition used by Chrysler.

Comprobaciones recomendadas

  • Perform a full module scan
  • Review freeze-frame and occurrence data
  • Confirm the exact vehicle, ECU and software context
  • Inspect relevant wiring and connectors
  • Check applicable OEM service information

Dodge

1 interpretación
P1108
Main relay - control circuit open Dodge · engine Fiabilidad del dato 62%

The control module detected an interruption (open circuit) in the Main relay - control circuit, so the expected electrical continuity was not present. This is the manufacturer-specific definition used by Dodge.

Posibles causas

  • Wiring
  • connections
  • main relay
  • ECM

Ford

1 interpretación
P1108
Dual Alternator Battery Lamp Circuit Malfunction Ford · battery Fiabilidad del dato 80%

The control module detected improper operation of the Dual Alternator Battery Lamp circuit. This is the manufacturer-specific definition used by Ford.

Posibles causas

  • Wiring
  • alternator (upper)
  • alternator (lower)
  • ECM

Hyundai

1 interpretación
P1108
Fuel Pump Hyundai · fuel Fiabilidad del dato 62%

The control module detected a fault associated with the Fuel Pump circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Hyundai.

Jaguar

1 interpretación
P1108
Manifold absolute pressure (MAP) sensor - circuit high input Jaguar · engine Fiabilidad del dato 62%

The control module detected that the signal in the Manifold absolute pressure (MAP) circuit stayed above the expected operating range. This is the manufacturer-specific definition used by Jaguar.

Posibles causas

  • Wiring short to positive
  • MAP sensor
  • ECM

Nissan

1 interpretación
P1108
Manifold absolute pressure (MAP) sensor - circuit malfunction Nissan · engine Fiabilidad del dato 62%

The control module detected improper operation of the Manifold absolute pressure (MAP) circuit. This is the manufacturer-specific definition used by Nissan.

Posibles causas

  • Wiring
  • MAP sensor
  • ECM

Subaru

1 interpretación
P1108
Induction Control Solenoid Valve Circuit Malfunction Subaru · engine Fiabilidad del dato 62%

The control module detected improper operation of the Induction Control Solenoid Valve circuit. This is the manufacturer-specific definition used by Subaru.

Suzuki

1 interpretación
P1108
Manifold absolute pressure (MAP) sensor - signal voltage high Suzuki · engine Fiabilidad del dato 62%

The control module detected that the Manifold absolute pressure (MAP) sensor voltage stayed above the expected range. This is the manufacturer-specific definition used by Suzuki.

Posibles causas

  • Wiring
  • MAP sensor
  • mechanical fault
  • ECM

VAG

1 interpretación
P1108
Oxygen Sensor Heating Circuit Bank 2 Sensor 1 Output Too Low VAG · emissions Fiabilidad del dato 62%

The control module detected that the Oxygen Sensor Heating Circuit Bank 2 Sensor 1 Output value was below the expected limit. This is the manufacturer-specific definition used by Volkswagen.

Se aplica a Volkswagen

Volvo

1 interpretación
P1108
Manifold absolute pressure (MAP) sensor/mass air flow (MAF) sensor - signal high Volvo · engine Fiabilidad del dato 62%

The control module detected that the Manifold absolute pressure (MAP) sensor/mass air flow (MAF) signal stayed above the expected range. This is the manufacturer-specific definition used by Volvo.

Posibles causas

  • Mechanical fault
  • intake leak
  • wiring
  • MAF sensor
  • MAP sensor
  • ECM

Códigos relacionados y cercanos

Cómo se lee P1108

P

Motor y transmisión: motor, cambio y transmisión.

1

Rango definido por el fabricante: el significado puede variar entre marcas.

108

Índice específico del fallo dentro del subsistema.

Preguntas frecuentes sobre P1108

¿Qué significa P1108?

Código de avería diagnóstico (10 interpretaciones). The control module detected that the BARO To MAP Sensor Circuit Comparison value was above the expected limit. This is the manufacturer-specific definition used by Chrysler.

¿P1108 es genérico o específico del fabricante?

P1108 es un código específico del fabricante. En esta base de datos está documentado para: Chrysler, Dodge, Ford, Hyundai, Jaguar, Nissan, Subaru, Suzuki, VAG, Volvo. El mismo número puede significar otra cosa en otras marcas.

¿Puede TuningBot eliminar P1108 a nivel de archivo?

Si la lógica del fallo vive en la calibración de la ECU, sí: nuestro servicio DTC Removal desactiva la entrada de fallo concreta. La corrección del checksum no está incluida: es un servicio aparte y opcional. ¿No sabes si tu caso encaja? Solicita una valoración gratuita y nuestros ingenieros revisarán tu archivo.

Otros servicios de archivo

ReprogramaciónResultados medidos en banco, por modelo y motor Ver los resultados →

← Buscar en toda la base de datos DTC