Orari: 07-23 tutti i giorni

Database DTC TuningBot · v4.37.15

P1108 Codice di errore diagnostico (10 interpretazioni)

10 interpretazioni specifiche del costruttore su 10 costruttori nel database DTC TuningBot.

P · PowertrainEngineOBD2

Chrysler

1 interpretazione
P1108
BARO To MAP Sensor Circuit Comparison Too High Chrysler · engine Affidabilità del dato 62%

The control module detected that the BARO To MAP Sensor Circuit Comparison value was above the expected limit. This is the manufacturer-specific definition used by Chrysler.

Controlli consigliati

  • Perform a full module scan
  • Review freeze-frame and occurrence data
  • Confirm the exact vehicle, ECU and software context
  • Inspect relevant wiring and connectors
  • Check applicable OEM service information

Dodge

1 interpretazione
P1108
Main relay - control circuit open Dodge · engine Affidabilità del dato 62%

The control module detected an interruption (open circuit) in the Main relay - control circuit, so the expected electrical continuity was not present. This is the manufacturer-specific definition used by Dodge.

Possibili cause

  • Wiring
  • connections
  • main relay
  • ECM

Ford

1 interpretazione
P1108
Dual Alternator Battery Lamp Circuit Malfunction Ford · battery Affidabilità del dato 80%

The control module detected improper operation of the Dual Alternator Battery Lamp circuit. This is the manufacturer-specific definition used by Ford.

Possibili cause

  • Wiring
  • alternator (upper)
  • alternator (lower)
  • ECM

Hyundai

1 interpretazione
P1108
Fuel Pump Hyundai · fuel Affidabilità del dato 62%

The control module detected a fault associated with the Fuel Pump circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Hyundai.

Jaguar

1 interpretazione
P1108
Manifold absolute pressure (MAP) sensor - circuit high input Jaguar · engine Affidabilità del dato 62%

The control module detected that the signal in the Manifold absolute pressure (MAP) circuit stayed above the expected operating range. This is the manufacturer-specific definition used by Jaguar.

Possibili cause

  • Wiring short to positive
  • MAP sensor
  • ECM

Nissan

1 interpretazione
P1108
Manifold absolute pressure (MAP) sensor - circuit malfunction Nissan · engine Affidabilità del dato 62%

The control module detected improper operation of the Manifold absolute pressure (MAP) circuit. This is the manufacturer-specific definition used by Nissan.

Possibili cause

  • Wiring
  • MAP sensor
  • ECM

Subaru

1 interpretazione
P1108
Induction Control Solenoid Valve Circuit Malfunction Subaru · engine Affidabilità del dato 62%

The control module detected improper operation of the Induction Control Solenoid Valve circuit. This is the manufacturer-specific definition used by Subaru.

Suzuki

1 interpretazione
P1108
Manifold absolute pressure (MAP) sensor - signal voltage high Suzuki · engine Affidabilità del dato 62%

The control module detected that the Manifold absolute pressure (MAP) sensor voltage stayed above the expected range. This is the manufacturer-specific definition used by Suzuki.

Possibili cause

  • Wiring
  • MAP sensor
  • mechanical fault
  • ECM

VAG

1 interpretazione
P1108
Oxygen Sensor Heating Circuit Bank 2 Sensor 1 Output Too Low VAG · emissions Affidabilità del dato 62%

The control module detected that the Oxygen Sensor Heating Circuit Bank 2 Sensor 1 Output value was below the expected limit. This is the manufacturer-specific definition used by Volkswagen.

Si applica a Volkswagen

Volvo

1 interpretazione
P1108
Manifold absolute pressure (MAP) sensor/mass air flow (MAF) sensor - signal high Volvo · engine Affidabilità del dato 62%

The control module detected that the Manifold absolute pressure (MAP) sensor/mass air flow (MAF) signal stayed above the expected range. This is the manufacturer-specific definition used by Volvo.

Possibili cause

  • Mechanical fault
  • intake leak
  • wiring
  • MAF sensor
  • MAP sensor
  • ECM

Codici correlati e vicini

Come si legge P1108

P

Powertrain: motore, cambio e trasmissione.

1

Gamma definita dal costruttore: il significato può cambiare tra marche.

108

Indice specifico del guasto dentro il sottosistema.

Domande frequenti su P1108

Cosa significa P1108?

Codice di errore diagnostico (10 interpretazioni). The control module detected that the BARO To MAP Sensor Circuit Comparison value was above the expected limit. This is the manufacturer-specific definition used by Chrysler.

P1108 è generico o specifico del costruttore?

P1108 è un codice specifico del costruttore. In questo database è documentato per: Chrysler, Dodge, Ford, Hyundai, Jaguar, Nissan, Subaru, Suzuki, VAG, Volvo. Lo stesso numero può significare altro su altre marche.

TuningBot può rimuovere P1108 a livello di file?

Se la logica del guasto vive nella calibrazione della ECU, sì: il nostro servizio DTC Removal disattiva la specifica voce di errore. La correzione del checksum non è inclusa: è un servizio a parte, opzionale. Non sei sicuro che il tuo caso rientri? Richiedi una valutazione gratuita e i nostri ingegneri controllano il tuo file.

Altri servizi sul file

RimappaturaRisultati misurati al banco, per modello e motore Vedi i risultati →

← Cerca in tutto il database DTC