Horário: 07h–23h diariamente

Base de dados DTC TuningBot · v4.37.15

P1108 Código de avaria de diagnóstico (10 interpretações)

10 interpretações específicas do fabricante em 10 fabricantes na base de dados DTC TuningBot.

P · Motor e transmissãoEngineOBD2

Chrysler

1 interpretação
P1108
BARO To MAP Sensor Circuit Comparison Too High Chrysler · engine Fiabilidade do dado 62%

The control module detected that the BARO To MAP Sensor Circuit Comparison value was above the expected limit. This is the manufacturer-specific definition used by Chrysler.

Verificações recomendadas

  • Perform a full module scan
  • Review freeze-frame and occurrence data
  • Confirm the exact vehicle, ECU and software context
  • Inspect relevant wiring and connectors
  • Check applicable OEM service information

Dodge

1 interpretação
P1108
Main relay - control circuit open Dodge · engine Fiabilidade do dado 62%

The control module detected an interruption (open circuit) in the Main relay - control circuit, so the expected electrical continuity was not present. This is the manufacturer-specific definition used by Dodge.

Causas possíveis

  • Wiring
  • connections
  • main relay
  • ECM

Ford

1 interpretação
P1108
Dual Alternator Battery Lamp Circuit Malfunction Ford · battery Fiabilidade do dado 80%

The control module detected improper operation of the Dual Alternator Battery Lamp circuit. This is the manufacturer-specific definition used by Ford.

Causas possíveis

  • Wiring
  • alternator (upper)
  • alternator (lower)
  • ECM

Hyundai

1 interpretação
P1108
Fuel Pump Hyundai · fuel Fiabilidade do dado 62%

The control module detected a fault associated with the Fuel Pump circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Hyundai.

Jaguar

1 interpretação
P1108
Manifold absolute pressure (MAP) sensor - circuit high input Jaguar · engine Fiabilidade do dado 62%

The control module detected that the signal in the Manifold absolute pressure (MAP) circuit stayed above the expected operating range. This is the manufacturer-specific definition used by Jaguar.

Causas possíveis

  • Wiring short to positive
  • MAP sensor
  • ECM

Nissan

1 interpretação
P1108
Manifold absolute pressure (MAP) sensor - circuit malfunction Nissan · engine Fiabilidade do dado 62%

The control module detected improper operation of the Manifold absolute pressure (MAP) circuit. This is the manufacturer-specific definition used by Nissan.

Causas possíveis

  • Wiring
  • MAP sensor
  • ECM

Subaru

1 interpretação
P1108
Induction Control Solenoid Valve Circuit Malfunction Subaru · engine Fiabilidade do dado 62%

The control module detected improper operation of the Induction Control Solenoid Valve circuit. This is the manufacturer-specific definition used by Subaru.

Suzuki

1 interpretação
P1108
Manifold absolute pressure (MAP) sensor - signal voltage high Suzuki · engine Fiabilidade do dado 62%

The control module detected that the Manifold absolute pressure (MAP) sensor voltage stayed above the expected range. This is the manufacturer-specific definition used by Suzuki.

Causas possíveis

  • Wiring
  • MAP sensor
  • mechanical fault
  • ECM

VAG

1 interpretação
P1108
Oxygen Sensor Heating Circuit Bank 2 Sensor 1 Output Too Low VAG · emissions Fiabilidade do dado 62%

The control module detected that the Oxygen Sensor Heating Circuit Bank 2 Sensor 1 Output value was below the expected limit. This is the manufacturer-specific definition used by Volkswagen.

Aplica-se a Volkswagen

Volvo

1 interpretação
P1108
Manifold absolute pressure (MAP) sensor/mass air flow (MAF) sensor - signal high Volvo · engine Fiabilidade do dado 62%

The control module detected that the Manifold absolute pressure (MAP) sensor/mass air flow (MAF) signal stayed above the expected range. This is the manufacturer-specific definition used by Volvo.

Causas possíveis

  • Mechanical fault
  • intake leak
  • wiring
  • MAF sensor
  • MAP sensor
  • ECM

Códigos relacionados e próximos

Como se lê P1108

P

Motor e transmissão: motor, caixa e transmissão.

1

Intervalo definido pelo fabricante: o significado pode variar entre marcas.

108

Índice específico da avaria dentro do subsistema.

Perguntas frequentes sobre P1108

O que significa P1108?

Código de avaria de diagnóstico (10 interpretações). The control module detected that the BARO To MAP Sensor Circuit Comparison value was above the expected limit. This is the manufacturer-specific definition used by Chrysler.

P1108 é genérico ou específico do fabricante?

P1108 é um código específico do fabricante. Nesta base de dados está documentado para: Chrysler, Dodge, Ford, Hyundai, Jaguar, Nissan, Subaru, Suzuki, VAG, Volvo. O mesmo número pode significar outra coisa noutras marcas.

A TuningBot consegue remover P1108 ao nível do ficheiro?

Se a lógica da avaria vive na calibração da ECU, sim: o nosso serviço DTC Removal desativa a entrada de avaria específica. A correção do checksum não está incluída: é um serviço à parte e opcional. Não sabe se o seu caso se aplica? Peça uma avaliação gratuita e os nossos engenheiros verificam o seu ficheiro.

Outros serviços de ficheiro

RemapeamentoResultados medidos no dinamômetro, por modelo e motor Ver os resultados →

← Pesquisar em toda a base de dados DTC