Horario: 07–23 todos los días

Base de datos DTC de TuningBot · v4.37.15

P1590 Código de avería diagnóstico (7 interpretaciones)

7 interpretaciones específicas del fabricante en 5 fabricantes, en la base de datos DTC de TuningBot.

P · Motor y transmisiónEngineOBD2
Páginas por marca:HondaLand RoverPSASubaruVAG

Honda

1 interpretación
P1590
Motor current U phase signal circuit - low input Honda · engine Fiabilidad del dato 62%

The control module detected that the Motor current U phase signal signal stayed below the expected range. This is the manufacturer-specific definition used by Honda.

Posibles causas

  • Wiring
  • motor control module (MCM) programming
  • MCM
  • motor current U phase sensor

Land Rover

1 interpretación
P1590
Antilock brake system (ABS) rough road signal - error message from ABS control unit Land Rover · braking Fiabilidad del dato 62%

The control module registered the fault condition described as "Antilock brake system (ABS) rough road signal - error message from ABS control unit". This is the manufacturer-specific definition used by Land Rover.

Posibles causas

  • Wiring
  • ABS system

PSA

2 interpretaciones
P1590
Flowmeter signal : Supply voltage too high PSA · battery Fiabilidad del dato 72%

The control module detected that the Flowmeter signal was above its expected limit. Documented for the Bosch EDC16C34 injection ECU (DV6TED4 1.6 HDi) on Peugeot applications; the same PSA control units are also fitted to Citroën models.

Se aplica a Peugeot Bosch EDC16C34 injection ECU (DV6TED4 1.6 HDi)
P1590
Oil pressure sensor supply fault : Short circuit to positive PSA · engine Fiabilidad del dato 72%

The control module detected a short circuit to battery voltage in the Oil pressure sensor supply fault circuit. Documented for the MCP 6-speed piloted manual gearbox ECU on Peugeot applications; the same PSA control units are also fitted to Citroën models.

Se aplica a Peugeot MCP 6-speed piloted manual gearbox ECU

Subaru

1 interpretación
P1590
Park neutral position (PNP) switch - voltage high Subaru · engine Fiabilidad del dato 80%

The control module detected that the Park neutral position (PNP) switch voltage stayed above the expected range. This is the manufacturer-specific definition used by Subaru.

Posibles causas

  • Wiring
  • PNP switch
  • ECM

VAG

2 interpretaciones
P1590
AC/heater air temperature control switch - open circuit VAG · engine Fiabilidad del dato 62%

The control module detected an interruption (open circuit) in the AC/heater air temperature control switch circuit, so the expected electrical continuity was not present. This is the manufacturer-specific definition used by Audi.

Posibles causas

  • Wiring open circuit
  • AC/heater air temperature control switch
Se aplica a Audi
P1590
AC/heater air temperature control switch - open circuit VAG · engine Fiabilidad del dato 62%

The control module detected an interruption (open circuit) in the AC/heater air temperature control switch circuit, so the expected electrical continuity was not present. This is the manufacturer-specific definition used by Volkswagen.

Posibles causas

  • Wiring open circuit
  • AC/heater air temperature control switch
Se aplica a Volkswagen

Códigos relacionados y cercanos

Cómo se lee P1590

P

Motor y transmisión: motor, cambio y transmisión.

1

Rango definido por el fabricante: el significado puede variar entre marcas.

590

Índice específico del fallo dentro del subsistema.

Preguntas frecuentes sobre P1590

¿Qué significa P1590?

Código de avería diagnóstico (7 interpretaciones). The control module detected that the Motor current U phase signal signal stayed below the expected range. This is the manufacturer-specific definition used by Honda.

¿P1590 es genérico o específico del fabricante?

P1590 es un código específico del fabricante. En esta base de datos está documentado para: Honda, Land Rover, PSA, Subaru, VAG. El mismo número puede significar otra cosa en otras marcas.

¿Puede TuningBot eliminar P1590 a nivel de archivo?

Si la lógica del fallo vive en la calibración de la ECU, sí: nuestro servicio DTC Removal desactiva la entrada de fallo concreta. La corrección del checksum no está incluida: es un servicio aparte y opcional. ¿No sabes si tu caso encaja? Solicita una valoración gratuita y nuestros ingenieros revisarán tu archivo.

Otros servicios de archivo

ReprogramaciónResultados medidos en banco, por modelo y motor Ver los resultados →

← Buscar en toda la base de datos DTC