The control module detected improper operation of the Fan Relay Low circuit. This is the manufacturer-specific definition used by Jaguar.
TuningBot DTC-Datenbank · v4.40.3
P1475 Diagnose-Fehlercode (5 Interpretationen)
5 herstellerspezifische Interpretationen bei 4 Herstellern in der TuningBot DTC-Datenbank.
Jaguar
1 Interpretation
Mercedes-Benz
1 InterpretationThe control module detected a fault associated with the Resonance Intake Line Switchover Valve Y227 circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Mercedes-Benz.
MINI
1 InterpretationThe control module detected a condition consistent with a leak affecting the Leakage Diagnostic Pump Reed Switch Did Not Close. This is the manufacturer-specific definition used by MINI.
VAG
2 InterpretationenThe control module detected an interruption (open circuit) in the EVAP Control System LDP Malfunction/ circuit, so the expected electrical continuity was not present. This is the manufacturer-specific definition used by Audi.
Mögliche Ursachen
- Wiring
- EVAP canister purge valve
- EVAP leak detection pump
- ECM
The control module did not receive the expected EVAP Leak Detection Pump: Malfunction/ signal. This is the manufacturer-specific definition used by Volkswagen. Volkswagen Group tools also report it as fault code 17883. Documented across Volkswagen Group applications (Audi, SEAT and Škoda included).
Symptome
Malfunction Indicator Light (MIL) active
Mögliche Ursachen
- Hoses to Leak Detection Pump faulty
- Wiring to Leak Detection Pump faulty
Empfohlene Prüfungen
- Check Hoses (Pressure/Vacuum) to Leak Detection Pump
- Check Wiring to Leak Detection Pump according to Wiring Diagram
Verwandte und benachbarte Codes
So liest man P1475
Antriebsstrang: Motor, Getriebe und Antrieb.
Herstellerdefinierter Bereich: die Bedeutung kann je Marke abweichen.
Spezifischer Fehlerindex innerhalb des Subsystems.
Häufige Fragen zu P1475
Was bedeutet P1475?
Diagnose-Fehlercode (5 Interpretationen). The control module detected improper operation of the Fan Relay Low circuit. This is the manufacturer-specific definition used by Jaguar.
Ist P1475 generisch oder herstellerspezifisch?
P1475 ist ein herstellerspezifischer Code. In dieser Datenbank ist er dokumentiert für: Jaguar, Mercedes-Benz, MINI, VAG. Dieselbe Nummer kann bei anderen Marken etwas anderes bedeuten.
Kann TuningBot P1475 auf Dateiebene entfernen?
Wenn die Fehlerlogik in der Steuergerätekalibrierung liegt, ja: unser DTC-Removal-Dienst deaktiviert den konkreten Fehlereintrag. Die Checksum-Korrektur ist nicht enthalten: Sie ist ein separater, optionaler Service. Unsicher, ob Ihr Fall dazugehört? Fordern Sie eine kostenlose Einschätzung an, und unsere Ingenieure prüfen Ihre Datei.
Weitere Dateidienste
Das System hinter diesem Code verstehen: EVAP-System
