The control module detected improper operation of the Fan Relay Low circuit. This is the manufacturer-specific definition used by Jaguar.
TuningBot DTC Database · v4.37.14
P1475 Diagnostic Trouble Code (5 interpretations)
5 manufacturer-specific interpretations across 4 manufacturers in the TuningBot DTC database.
Jaguar
1 interpretation
Mercedes-Benz
1 interpretationThe control module detected a fault associated with the Resonance Intake Line Switchover Valve Y227 circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Mercedes-Benz.
MINI
1 interpretationThe control module detected a condition consistent with a leak affecting the Leakage Diagnostic Pump Reed Switch Did Not Close. This is the manufacturer-specific definition used by MINI.
VAG
2 interpretationsThe control module detected an interruption (open circuit) in the EVAP Control System LDP Malfunction/ circuit, so the expected electrical continuity was not present. This is the manufacturer-specific definition used by Audi.
Possible causes
- Wiring
- EVAP canister purge valve
- EVAP leak detection pump
- ECM
The control module did not receive the expected EVAP Leak Detection Pump: Malfunction/ signal. This is the manufacturer-specific definition used by Volkswagen. Volkswagen Group tools also report it as fault code 17883. Documented across Volkswagen Group applications (Audi, SEAT and Škoda included).
Symptoms
Malfunction Indicator Light (MIL) active
Possible causes
- Hoses to Leak Detection Pump faulty
- Wiring to Leak Detection Pump faulty
Recommended checks
- Check Hoses (Pressure/Vacuum) to Leak Detection Pump
- Check Wiring to Leak Detection Pump according to Wiring Diagram
Related and nearby codes
How to read P1475
Powertrain: engine, transmission and driveline systems.
Manufacturer-defined range: the meaning can differ between brands.
Specific fault index within the subsystem.
Frequently asked questions about P1475
What does P1475 mean?
Diagnostic Trouble Code (5 interpretations). The control module detected improper operation of the Fan Relay Low circuit. This is the manufacturer-specific definition used by Jaguar.
Is P1475 generic or manufacturer-specific?
P1475 is a manufacturer-specific code. In this database it is documented for: Jaguar, Mercedes-Benz, MINI, VAG. The same number can mean something different on other brands.
Can TuningBot remove P1475 at file level?
If the fault logic lives in the ECU calibration, yes: our DTC Removal file service disables the specific fault entry and, where the ECU needs it, corrects the checksum too. Not sure whether your case qualifies? Request a free assessment and our engineers will check your ECU file.
Other file services
Understand the system behind this code: EVAP System
