Öffnungszeiten: täglich 07–23 Uhr

TuningBot DTC-Datenbank · v4.37.15

P1166 VAG - Diagnose-Fehlercode (2 Interpretationen)

Herstellerspezifische Interpretation für VAG. Alle Interpretationen von P1166

P · AntriebsstrangFuelOBD2

Was P1166 bedeutet

P1166
Long term fuel trim 2, Bank 1 - above rich limit VAG · fuel Datenzuverlässigkeit 62%

The control module detected a fault associated with the Long term fuel trim 2, Bank 1 - above rich limit circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Audi.

Mögliche Ursachen

  • Fuel pressure/pump
  • injectors
  • EVAP canister purge valve
  • EGR system
  • HO2S
  • intake/exhaust system
Gilt für Audi
P1166
Long term fuel trim above rich limit VAG · fuel Datenzuverlässigkeit 80%

The control module detected a fault associated with the Long term fuel trim above rich limit circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Volkswagen.

Mögliche Ursachen

  • Fuel pressure/pump
  • injectors
  • EVAP canister purge valve
  • EGR system
  • HO2S
  • intake/exhaust system
Gilt für Volkswagen

Verwandte und benachbarte Codes

So liest man P1166

P

Antriebsstrang: Motor, Getriebe und Antrieb.

1

Herstellerdefinierter Bereich: die Bedeutung kann je Marke abweichen.

166

Spezifischer Fehlerindex innerhalb des Subsystems.

Häufige Fragen zu P1166

Was bedeutet P1166?

Diagnose-Fehlercode (2 Interpretationen). The control module detected a fault associated with the Long term fuel trim 2, Bank 1 - above rich limit circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Audi.

Ist P1166 generisch oder herstellerspezifisch?

P1166 ist ein herstellerspezifischer Code. In dieser Datenbank ist er dokumentiert für: VAG. Dieselbe Nummer kann bei anderen Marken etwas anderes bedeuten.

Kann TuningBot P1166 auf Dateiebene entfernen?

Wenn die Fehlerlogik in der Steuergerätekalibrierung liegt, ja: unser DTC-Removal-Dienst deaktiviert den konkreten Fehlereintrag. Die Checksum-Korrektur ist nicht enthalten: Sie ist ein separater, optionaler Service. Unsicher, ob Ihr Fall dazugehört? Fordern Sie eine kostenlose Einschätzung an, und unsere Ingenieure prüfen Ihre Datei.

Weitere Dateidienste

ChiptuningStage-1-Prüfstandsergebnisse für VAG-Motoren Ergebnisse ansehen →

← Die gesamte DTC-Datenbank durchsuchen