Öffnungszeiten: täglich 07–23 Uhr

TuningBot DTC-Datenbank · v4.37.15

P1155 VAG - Diagnose-Fehlercode (2 Interpretationen)

Herstellerspezifische Interpretation für VAG. Alle Interpretationen von P1155

P · AntriebsstrangEngineOBD2

Was P1155 bedeutet

P1155
Manifold absolute pressure (MAP) sensor - short to positive VAG · engine Datenzuverlässigkeit 62%

The control module detected a short circuit to battery voltage in the Manifold absolute pressure (MAP) circuit. This is the manufacturer-specific definition used by Audi.

Mögliche Ursachen

  • Wiring short to positive
  • MAP sensor
Gilt für Audi
P1155
Manifold Abs.Pressure Sensor (G71): Circ. Short to B+ VAG · braking Datenzuverlässigkeit 84%

The control module detected a short circuit to battery voltage in the Manifold Abs.Pressure Sensor (G71): Circ. circuit. This is the manufacturer-specific definition used by Volkswagen. Volkswagen Group tools also report it as fault code 17563. Documented across Volkswagen Group applications (Audi, SEAT and Škoda included).

Symptome

Limp mode

Mögliche Ursachen

  • Connection(s) to/from Manifold Abs.Pressure Sensor faulty
  • Manifold Abs.Pressure Sensor (G71) faulty
  • Pipes/hoses not/wrongly attached

Empfohlene Prüfungen

  • Check wiring and connections
  • Check / Replace Manifold Abs.Pressure Sensor (G71)
  • Check pipes and hoses
Gilt für Volkswagen

Verwandte und benachbarte Codes

So liest man P1155

P

Antriebsstrang: Motor, Getriebe und Antrieb.

1

Herstellerdefinierter Bereich: die Bedeutung kann je Marke abweichen.

155

Spezifischer Fehlerindex innerhalb des Subsystems.

Häufige Fragen zu P1155

Was bedeutet P1155?

Diagnose-Fehlercode (2 Interpretationen). The control module detected a short circuit to battery voltage in the Manifold absolute pressure (MAP) circuit. This is the manufacturer-specific definition used by Audi.

Ist P1155 generisch oder herstellerspezifisch?

P1155 ist ein herstellerspezifischer Code. In dieser Datenbank ist er dokumentiert für: VAG. Dieselbe Nummer kann bei anderen Marken etwas anderes bedeuten.

Kann TuningBot P1155 auf Dateiebene entfernen?

Wenn die Fehlerlogik in der Steuergerätekalibrierung liegt, ja: unser DTC-Removal-Dienst deaktiviert den konkreten Fehlereintrag. Die Checksum-Korrektur ist nicht enthalten: Sie ist ein separater, optionaler Service. Unsicher, ob Ihr Fall dazugehört? Fordern Sie eine kostenlose Einschätzung an, und unsere Ingenieure prüfen Ihre Datei.

Weitere Dateidienste

ChiptuningStage-1-Prüfstandsergebnisse für VAG-Motoren Ergebnisse ansehen →

← Die gesamte DTC-Datenbank durchsuchen