TuningBot DTC Database · v4.37.15
8 manufacturer-specific interpretations across 4 manufacturers in the TuningBot DTC database.
FordThe control module judged the A/C Refrigerant Temperature signal implausible: it stayed inside electrical limits but did not match the value expected for the current operating conditions. This is the manufacturer-specific definition used by Ford.
HondaThe control module detected a fault associated with the Charge/discharge balance problem circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Honda.
PSAThe control module detected the fault condition "Additive system fault" for the Particle filter additive system. Documented for the Bosch EDC16C34 injection ECU (DV6TED4 1.6 HDi) on Peugeot applications; the same PSA control units are also fitted to Citroën models.
The control module detected the fault condition "CAN network fault or pump fault" for the Multiplexed additive pump. Documented for the Continental SID 807 injection ECU (DV6C 1.6 HDi) on Peugeot applications; the same PSA control units are also fitted to Citroën models.
The control module detected the fault condition "Network CAN fault or additive pump fault" for the Multiplexed additive pump. Documented for the Delphi DCM 3.5 injection ECU (DW10C 2.0 HDi) on Peugeot applications; the same PSA control units are also fitted to Citroën models.
The control module detected the fault condition "No communication with additive ECU" for the Additive system. Documented for the Siemens SID 803 injection ECU (DW10BTED4 2.0 HDi) on Peugeot applications; the same PSA control units are also fitted to Citroën models.
VAGThe control module detected a short circuit to ground in the Secondary air injection (AIR) pump relay circuit. This is the manufacturer-specific definition used by Audi.
The control module detected a short circuit to ground in the Secondary Air Pump Relay (J299) circuit. This is the manufacturer-specific definition used by Volkswagen. Volkswagen Group tools also report it as fault code 17843. Documented across Volkswagen Group applications (Audi, SEAT and Škoda included).
Secondary Air Pump Relay (J299) faulty
Check Secondary Air Pump Relay (J299)
Powertrain: engine, transmission and driveline systems.
Manufacturer-defined range: the meaning can differ between brands.
Specific fault index within the subsystem.
Diagnostic Trouble Code (8 interpretations). The control module judged the A/C Refrigerant Temperature signal implausible: it stayed inside electrical limits but did not match the value expected for the current operating conditions. This is the manufacturer-specific definition used by Ford.
P1435 is a manufacturer-specific code. In this database it is documented for: Ford, Honda, PSA, VAG. The same number can mean something different on other brands.
If the fault logic lives in the ECU calibration, yes: our DTC Removal file service disables the specific fault entry. Checksum correction is not included: it is a separate, optional service. Not sure whether your case qualifies? Request a free assessment and our engineers will check your ECU file.
Understand the system behind this code: DPF System
ItalianoIT
DeutschDE
EspañolES
PortuguêsPT
FrançaisFR
РусскийRU