Hours: 07–23 daily

TuningBot DTC Database · v4.37.14

P1405 Diagnostic Trouble Code (4 interpretations)

4 manufacturer-specific interpretations across 4 manufacturers in the TuningBot DTC database.

P · PowertrainEmissionsOBD2

Chrysler

1 interpretation
P1405
Exhaust Gas Recirculation System Valve 3 Chrysler · emissions Data confidence 62%

The control module detected a fault associated with the Exhaust Gas Recirculation System Valve 3 circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Chrysler.

Recommended checks

  • Perform a full module scan
  • Review freeze-frame and occurrence data
  • Confirm the exact vehicle, ECU and software context
  • Inspect relevant wiring and connectors
  • Check applicable OEM service information

Hyundai

1 interpretation
P1405
EGR Temperature Incorrect Hyundai · emissions Data confidence 62%

The control module detected that the EGR Temperature state or value did not match what was expected. This is the manufacturer-specific definition used by Hyundai.

Mazda

1 interpretation
P1405
Differential pressure feedback sensor - upstream hose off or plugged Mazda · emissions Data confidence 80%

The control module detected a fault associated with the Differential pressure feedback sensor - upstream hose off or plugged circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Mazda.

Possible causes

Mechanical fault

Opel

1 interpretation
P1405
Exhaust gas recirculation (EGR) valve position sensor - malfunction Opel · emissions Data confidence 62%

The control module detected improper operation of the Exhaust gas recirculation (EGR) valve position. This is the manufacturer-specific definition used by Opel.

Related and nearby codes

How to read P1405

P

Powertrain: engine, transmission and driveline systems.

1

Manufacturer-defined range: the meaning can differ between brands.

405

Specific fault index within the subsystem.

Frequently asked questions about P1405

What does P1405 mean?

Diagnostic Trouble Code (4 interpretations). The control module detected a fault associated with the Exhaust Gas Recirculation System Valve 3 circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Chrysler.

Is P1405 generic or manufacturer-specific?

P1405 is a manufacturer-specific code. In this database it is documented for: Chrysler, Hyundai, Mazda, Opel. The same number can mean something different on other brands.

Can TuningBot remove P1405 at file level?

If the fault logic lives in the ECU calibration, yes: our DTC Removal file service disables the specific fault entry and, where the ECU needs it, corrects the checksum too. Not sure whether your case qualifies? Request a free assessment and our engineers will check your ECU file.

Other file services

ECU tuningDyno-tested results by model and engine See the results →

← Search the full DTC database