Öffnungszeiten: täglich 07–23 Uhr

TuningBot DTC-Datenbank · v4.37.15

P1486 Diagnose-Fehlercode (6 Interpretationen)

6 herstellerspezifische Interpretationen bei 6 Herstellern in der TuningBot DTC-Datenbank.

P · AntriebsstrangEmissionsOBD2

Chrysler

1 Interpretation
P1486
Evaporative emission (EVAP) system - blockage detected Chrysler · emissions Datenzuverlässigkeit 62%

The control module detected a fault associated with the Evaporative emission (EVAP) system - blockage detected circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Chrysler.

Mögliche Ursachen

  • Hose connection(s)
  • hose blocked/trapped
  • EVAP canister

Honda

1 Interpretation
P1486
Thermostat - range/performance problem Honda · thermal_management Datenzuverlässigkeit 62%

The control module judged the Thermostat behaviour implausible for the current operating conditions. This is the manufacturer-specific definition used by Honda.

Mögliche Ursachen

  • Thermostat
  • cooling system

Empfohlene Prüfungen

  • Perform a full module scan
  • Review freeze-frame and occurrence data
  • Compare commanded and measured values
  • Check applicable OEM service information

Hyundai

1 Interpretation
P1486
EGR Solenoid Valve Vent Open or Short Hyundai · emissions Datenzuverlässigkeit 62%

The control module detected an open circuit or short circuit condition in the EGR Solenoid Valve Vent circuit. This is the manufacturer-specific definition used by Hyundai.

Mazda

1 Interpretation
P1486
Exhaust gas recirculation (EGR) valve - malfunction Mazda · emissions Datenzuverlässigkeit 62%

The control module detected improper operation of the Exhaust gas recirculation (EGR) valve. This is the manufacturer-specific definition used by Mazda.

Mögliche Ursachen

  • Wiring
  • EGR valve
  • ECM

Mitsubishi

1 Interpretation
P1486
EVAP Leak Monitor Pinched Hose Found Mitsubishi · emissions Datenzuverlässigkeit 80%

The control module detected a condition consistent with a leak affecting the EVAP. This is the manufacturer-specific definition used by Mitsubishi.

Volvo

1 Interpretation
P1486
Engine coolant blower motor relay - signal low Volvo · climate_control Datenzuverlässigkeit 62%

The control module detected that the Engine coolant blower motor relay signal stayed below the expected range. This is the manufacturer-specific definition used by Volvo.

Mögliche Ursachen

  • Wiring short to ground
  • engine coolant blower motor relay

Verwandte und benachbarte Codes

So liest man P1486

P

Antriebsstrang: Motor, Getriebe und Antrieb.

1

Herstellerdefinierter Bereich: die Bedeutung kann je Marke abweichen.

486

Spezifischer Fehlerindex innerhalb des Subsystems.

Häufige Fragen zu P1486

Was bedeutet P1486?

Diagnose-Fehlercode (6 Interpretationen). The control module detected a fault associated with the Evaporative emission (EVAP) system - blockage detected circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Chrysler.

Ist P1486 generisch oder herstellerspezifisch?

P1486 ist ein herstellerspezifischer Code. In dieser Datenbank ist er dokumentiert für: Chrysler, Honda, Hyundai, Mazda, Mitsubishi, Volvo. Dieselbe Nummer kann bei anderen Marken etwas anderes bedeuten.

Kann TuningBot P1486 auf Dateiebene entfernen?

Wenn die Fehlerlogik in der Steuergerätekalibrierung liegt, ja: unser DTC-Removal-Dienst deaktiviert den konkreten Fehlereintrag. Die Checksum-Korrektur ist nicht enthalten: Sie ist ein separater, optionaler Service. Unsicher, ob Ihr Fall dazugehört? Fordern Sie eine kostenlose Einschätzung an, und unsere Ingenieure prüfen Ihre Datei.

Weitere Dateidienste

ChiptuningPrüfstandsergebnisse nach Modell und Motor Ergebnisse ansehen →

← Die gesamte DTC-Datenbank durchsuchen