Horário: 07h–23h diariamente

Base de dados DTC TuningBot · v4.37.15

P1410 Código de avaria de diagnóstico (11 interpretações)

11 interpretações específicas do fabricante em 11 fabricantes na base de dados DTC TuningBot.

P · Motor e transmissãoEmissionsOBD2

Chrysler

1 interpretação
P1410
Fuel Tank Pressure System Chrysler · emissions Fiabilidade do dado 62%

The control module detected a fault associated with the Fuel Tank Pressure System circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Chrysler.

Verificações recomendadas

  • Perform a full module scan
  • Review freeze-frame and occurrence data
  • Confirm the exact vehicle, ECU and software context
  • Inspect relevant wiring and connectors
  • Check applicable OEM service information

Ford

1 interpretação
P1410
EGR Barometric Pressure Sensor VREF Voltage Ford · emissions Fiabilidade do dado 80%

The control module detected a fault associated with the EGR Barometric Pressure Sensor VREF Voltage circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Ford.

Verificações recomendadas

  • Perform a full module scan
  • Review freeze-frame and occurrence data
  • Compare commanded and measured values
  • Check applicable OEM service information

Honda

1 interpretação
P1410
Secondary air injection (AIR) pump - malfunction Honda · emissions Fiabilidade do dado 62%

The control module detected improper operation of the Secondary air injection (AIR) pump. This is the manufacturer-specific definition used by Honda.

Causas possíveis

  • Wiring
  • AIR pump relay
  • AIR pump
  • ECM

Kia

1 interpretação
P1410
EVAP Purge Control Solenoid Circuit High Voltage Kia · emissions Fiabilidade do dado 62%

The control module detected that the signal in the EVAP Purge Control Solenoid circuit stayed above the expected operating range. This is the manufacturer-specific definition used by Kia.

Lexus

1 interpretação
P1410
Exhaust gas recirculation (EGR) valve position sensor - malfunction Lexus · emissions Fiabilidade do dado 80%

The control module detected improper operation of the Exhaust gas recirculation (EGR) valve position. This is the manufacturer-specific definition used by Lexus.

Causas possíveis

  • Wiring
  • EGR valve position sensor
  • ECM

Opel

1 interpretação
P1410
Secondary air injection (AIR) pump relay - circuit malfunction Opel · emissions Fiabilidade do dado 62%

The control module detected improper operation of the Secondary air injection (AIR) pump relay circuit. This is the manufacturer-specific definition used by Opel.

Subaru

1 interpretação
P1410
Secondary air injection (AIR) solenoid - stuck open Subaru · emissions Fiabilidade do dado 62%

The control module determined that the Secondary air injection (AIR) solenoid did not change state as commanded and appears stuck. This is the manufacturer-specific definition used by Subaru.

Causas possíveis

  • Wiring
  • air leaks
  • AIR solenoid

Suzuki

1 interpretação
P1410
Fuel tank pressure control system - malfunction Suzuki · emissions Fiabilidade do dado 80%

The control module detected improper operation of the Fuel tank pressure control system. This is the manufacturer-specific definition used by Suzuki.

Causas possíveis

  • Wiring
  • fuel tank pressure control solenoid
  • ECM

Toyota

1 interpretação
P1410
Exhaust gas recirculation (EGR) valve position sensor - malfunction Toyota · emissions Fiabilidade do dado 80%

The control module detected improper operation of the Exhaust gas recirculation (EGR) valve position. This is the manufacturer-specific definition used by Toyota.

Causas possíveis

  • Wiring
  • EGR valve position sensor
  • ECM

VAG

1 interpretação
P1410
Evaporative emission (EVAP) canister purge valve - short to positive VAG · emissions Fiabilidade do dado 62%

The control module detected a short circuit to battery voltage in the Evaporative emission (EVAP) canister purge valve circuit. This is the manufacturer-specific definition used by Audi.

Causas possíveis

  • Wiring short to positive
  • EVAP canister purge valve
Aplica-se a Audi

Volvo

1 interpretação
P1410
Outside air temperature sensor - no signal Volvo · engine Fiabilidade do dado 62%

The control module did not receive the expected Outside air temperature signal. This is the manufacturer-specific definition used by Volvo.

Causas possíveis

  • Wiring
  • poor connection
  • outside air temperature sensor
  • ECM

Códigos relacionados e próximos

Como se lê P1410

P

Motor e transmissão: motor, caixa e transmissão.

1

Intervalo definido pelo fabricante: o significado pode variar entre marcas.

410

Índice específico da avaria dentro do subsistema.

Perguntas frequentes sobre P1410

O que significa P1410?

Código de avaria de diagnóstico (11 interpretações). The control module detected a fault associated with the Fuel Tank Pressure System circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Chrysler.

P1410 é genérico ou específico do fabricante?

P1410 é um código específico do fabricante. Nesta base de dados está documentado para: Chrysler, Ford, Honda, Kia, Lexus, Opel, Subaru, Suzuki, Toyota, VAG, Volvo. O mesmo número pode significar outra coisa noutras marcas.

A TuningBot consegue remover P1410 ao nível do ficheiro?

Se a lógica da avaria vive na calibração da ECU, sim: o nosso serviço DTC Removal desativa a entrada de avaria específica. A correção do checksum não está incluída: é um serviço à parte e opcional. Não sabe se o seu caso se aplica? Peça uma avaliação gratuita e os nossos engenheiros verificam o seu ficheiro.

Outros serviços de ficheiro

RemapeamentoResultados medidos no dinamômetro, por modelo e motor Ver os resultados →

← Pesquisar em toda a base de dados DTC