P1198 Codice di errore diagnostico (8 interpretazioni)

The control module detected that the Mass air flow (MAF)/vane air flow (VAF) - flow value was above the expected limit. This is the manufacturer-specific definition used by BMW.

The control module detected that the Radiator Temp Sensor Input value was above the expected limit. This is the manufacturer-specific definition used by Chrysler.

The control module detected a fault associated with the Pump Rotor Control Underfueling circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Ford.

The control module detected that the Radiator Temperature Sensor Voltage value was above the expected limit. This is the manufacturer-specific definition used by Jeep.

The control module detected a fault associated with the Differential Pressure Sensor Intake Manifold Signal circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by MINI.

The control module detected that the Fuel flow regulation electrovalve was below its expected limit. Documented for the Siemens SID 803 injection ECU (DW10BTED4 2.0 HDi) on Peugeot applications; the same PSA control units are also fitted to Citroën models.

The control module detected improper operation of the Heated oxygen sensor (HO2S) 2, Bank 1, heater circuit. This is the manufacturer-specific definition used by Audi.

The control module detected improper operation of the Heated oxygen sensor (HO2S) heater circuit. This is the manufacturer-specific definition used by Volkswagen.