Base de datos DTC de TuningBot · v4.37.15
8 interpretaciones específicas del fabricante en 4 fabricantes, en la base de datos DTC de TuningBot.
ChevroletThe control module detected improper operation of the Reverse inhibit solenoid circuit. This is the manufacturer-specific definition used by Chevrolet.
Land RoverThe control module detected a fault associated with the Immobilizer signal - CAN data bus circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Land Rover.
Wiring short circuit to ground
PSAThe control module detected the fault condition "ECU internal fault" for the Engine ECU. Documented for the Bosch EDC16C34 injection ECU (DV6TED4 1.6 HDi) on Peugeot applications; the same PSA control units are also fitted to Citroën models.
The stored code identifies a fault of the Coded engine immobiliser fault. Documented for the Bosch MED 17.4.x engine ECU (EP6 THP family) on Peugeot applications; the same PSA control units are also fitted to Citroën models. PSA documentation does not characterise the failure mode further.
The stored code identifies a fault of the Coded engine immobiliser fault. Documented for the Bosch MEV17.4 engine ECU (EP6 1.6 VTi) on Peugeot applications; the same PSA control units are also fitted to Citroën models. PSA documentation does not characterise the failure mode further.
The control module detected the fault condition "internal fault" for the Engine ECU. Documented for the Siemens SID 803 injection ECU (DW10BTED4 2.0 HDi) on Peugeot applications; the same PSA control units are also fitted to Citroën models.
VAGThe control module detected improper operation of the Injector 2 - current circuit. This is the manufacturer-specific definition used by Audi.
Wiring open circuit/short to ground
The control module detected an electrical fault in the Valve for Pump - Jet: Cylinder 2 (N241) circuit. This is the manufacturer-specific definition used by Volkswagen. Volkswagen Group tools also report it as fault code 18075. Documented across Volkswagen Group applications (Audi, SEAT and Škoda included).
Irregular rpm
Check wiring and Check / Clean all connections
Motor y transmisión: motor, cambio y transmisión.
Rango definido por el fabricante: el significado puede variar entre marcas.
Índice específico del fallo dentro del subsistema.
Código de avería diagnóstico (8 interpretaciones). The control module detected improper operation of the Reverse inhibit solenoid circuit. This is the manufacturer-specific definition used by Chevrolet.
P1667 es un código específico del fabricante. En esta base de datos está documentado para: Chevrolet, Land Rover, PSA, VAG. El mismo número puede significar otra cosa en otras marcas.
Si la lógica del fallo vive en la calibración de la ECU, sí: nuestro servicio DTC Removal desactiva la entrada de fallo concreta. La corrección del checksum no está incluida: es un servicio aparte y opcional. ¿No sabes si tu caso encaja? Solicita una valoración gratuita y nuestros ingenieros revisarán tu archivo.
Entender el sistema detrás de este código: Inmovilizador y emparejamiento de ECU
EnglishEN
ItalianoIT
DeutschDE
PortuguêsPT
FrançaisFR
РусскийRU