TuningBot DTC-Datenbank · v4.37.15
8 herstellerspezifische Interpretationen bei 4 Herstellern in der TuningBot DTC-Datenbank.
ChevroletThe control module detected improper operation of the Reverse inhibit solenoid circuit. This is the manufacturer-specific definition used by Chevrolet.
Land RoverThe control module detected a fault associated with the Immobilizer signal - CAN data bus circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Land Rover.
Wiring short circuit to ground
PSAThe control module detected the fault condition "ECU internal fault" for the Engine ECU. Documented for the Bosch EDC16C34 injection ECU (DV6TED4 1.6 HDi) on Peugeot applications; the same PSA control units are also fitted to Citroën models.
The stored code identifies a fault of the Coded engine immobiliser fault. Documented for the Bosch MED 17.4.x engine ECU (EP6 THP family) on Peugeot applications; the same PSA control units are also fitted to Citroën models. PSA documentation does not characterise the failure mode further.
The stored code identifies a fault of the Coded engine immobiliser fault. Documented for the Bosch MEV17.4 engine ECU (EP6 1.6 VTi) on Peugeot applications; the same PSA control units are also fitted to Citroën models. PSA documentation does not characterise the failure mode further.
The control module detected the fault condition "internal fault" for the Engine ECU. Documented for the Siemens SID 803 injection ECU (DW10BTED4 2.0 HDi) on Peugeot applications; the same PSA control units are also fitted to Citroën models.
VAGThe control module detected improper operation of the Injector 2 - current circuit. This is the manufacturer-specific definition used by Audi.
Wiring open circuit/short to ground
The control module detected an electrical fault in the Valve for Pump - Jet: Cylinder 2 (N241) circuit. This is the manufacturer-specific definition used by Volkswagen. Volkswagen Group tools also report it as fault code 18075. Documented across Volkswagen Group applications (Audi, SEAT and Škoda included).
Irregular rpm
Check wiring and Check / Clean all connections
Antriebsstrang: Motor, Getriebe und Antrieb.
Herstellerdefinierter Bereich: die Bedeutung kann je Marke abweichen.
Spezifischer Fehlerindex innerhalb des Subsystems.
Diagnose-Fehlercode (8 Interpretationen). The control module detected improper operation of the Reverse inhibit solenoid circuit. This is the manufacturer-specific definition used by Chevrolet.
P1667 ist ein herstellerspezifischer Code. In dieser Datenbank ist er dokumentiert für: Chevrolet, Land Rover, PSA, VAG. Dieselbe Nummer kann bei anderen Marken etwas anderes bedeuten.
Wenn die Fehlerlogik in der Steuergerätekalibrierung liegt, ja: unser DTC-Removal-Dienst deaktiviert den konkreten Fehlereintrag. Die Checksum-Korrektur ist nicht enthalten: Sie ist ein separater, optionaler Service. Unsicher, ob Ihr Fall dazugehört? Fordern Sie eine kostenlose Einschätzung an, und unsere Ingenieure prüfen Ihre Datei.
Das System hinter diesem Code verstehen: Wegfahrsperre und ECU-Kopplung
EnglishEN
ItalianoIT
EspañolES
PortuguêsPT
FrançaisFR
РусскийRU