Base de datos DTC de TuningBot · v4.37.15
8 interpretaciones específicas del fabricante en 6 fabricantes, en la base de datos DTC de TuningBot.
DodgeThe control module detected a fault associated with the Speed Control Switch Always Low circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Dodge.
FordThe control module did not receive the expected Voltage to Vehicle Load Control Module signal. This is the manufacturer-specific definition used by Ford.
HyundaiThe control module detected improper operation of the Immobilizer Indicator. This is the manufacturer-specific definition used by Hyundai.
PSAThe stored code identifies a fault of the ECU internal fault. Documented for the Bosch MED 17.4.x engine ECU (EP6 THP family) on Peugeot applications; the same PSA control units are also fitted to Citroën models. PSA documentation does not characterise the failure mode further.
The stored code identifies a fault of the ECU internal fault. Documented for the Bosch MEV17.4 engine ECU (EP6 1.6 VTi) on Peugeot applications; the same PSA control units are also fitted to Citroën models. PSA documentation does not characterise the failure mode further.
The control module detected the fault condition "Safety" for the Incoherent information relating to the automatic gearbox. Documented for the Magneti Marelli MM6KP engine ECU (EW7A/EW10A) on Peugeot applications; the same PSA control units are also fitted to Citroën models.
VAGThe control module did not receive the expected CAN data bus, TCM signal. This is the manufacturer-specific definition used by Audi.
VolvoThe control module detected that the Malfunction indicator lamp (MIL) signal stayed above the expected range. This is the manufacturer-specific definition used by Volvo.
Motor y transmisión: motor, cambio y transmisión.
Rango definido por el fabricante: el significado puede variar entre marcas.
Índice específico del fallo dentro del subsistema.
Código de avería diagnóstico (8 interpretaciones). The control module detected a fault associated with the Speed Control Switch Always Low circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Dodge.
P1626 es un código específico del fabricante. En esta base de datos está documentado para: Dodge, Ford, Hyundai, PSA, VAG, Volvo. El mismo número puede significar otra cosa en otras marcas.
Si la lógica del fallo vive en la calibración de la ECU, sí: nuestro servicio DTC Removal desactiva la entrada de fallo concreta. La corrección del checksum no está incluida: es un servicio aparte y opcional. ¿No sabes si tu caso encaja? Solicita una valoración gratuita y nuestros ingenieros revisarán tu archivo.
Entender el sistema detrás de este código: Inmovilizador y emparejamiento de ECU
EnglishEN
ItalianoIT
DeutschDE
PortuguêsPT
FrançaisFR
РусскийRU