The control module detected the fault condition "Control short-circuited to earth or open circuit" for the Pre-heating relay circuit. Documented for the Bosch EDC16C34 injection ECU (DV6TED4 1.6 HDi) on Peugeot applications; the same PSA control units are also fitted to Citroën models.
TuningBot DTC-Datenbank · v4.37.15
P1350 PSA - Diagnose-Fehlercode (4 Interpretationen)
Herstellerspezifische Interpretation für PSA. Alle Interpretationen von P1350
Was P1350 bedeutet
The control module detected a short circuit to ground in the Clutch master cylinder position measurement circuit. Documented for the Continental SID 807 injection ECU (DV6C 1.6 HDi) on Peugeot applications; the same PSA control units are also fitted to Citroën models.
The control module detected a short circuit to ground in the Preheater relay circuit. Documented for the Delphi DCM 3.5 injection ECU (DW10C 2.0 HDi) on Peugeot applications; the same PSA control units are also fitted to Citroën models.
The control module detected the fault condition "Control short-circuited to earth or open circuit" for the Pre-heating relay circuit. Documented for the Siemens SID 803 injection ECU (DW10BTED4 2.0 HDi) on Peugeot applications; the same PSA control units are also fitted to Citroën models.
Verwandte und benachbarte Codes
So liest man P1350
Antriebsstrang: Motor, Getriebe und Antrieb.
Herstellerdefinierter Bereich: die Bedeutung kann je Marke abweichen.
Spezifischer Fehlerindex innerhalb des Subsystems.
Häufige Fragen zu P1350
Was bedeutet P1350?
Diagnose-Fehlercode (4 Interpretationen). The control module detected the fault condition "Control short-circuited to earth or open circuit" for the Pre-heating relay circuit. Documented for the Bosch EDC16C34 injection ECU (DV6TED4 1.6 HDi) on Peugeot applications; the same PSA control units are also fitted to Citroën models.
Ist P1350 generisch oder herstellerspezifisch?
P1350 ist ein herstellerspezifischer Code. In dieser Datenbank ist er dokumentiert für: PSA. Dieselbe Nummer kann bei anderen Marken etwas anderes bedeuten.
Kann TuningBot P1350 auf Dateiebene entfernen?
Wenn die Fehlerlogik in der Steuergerätekalibrierung liegt, ja: unser DTC-Removal-Dienst deaktiviert den konkreten Fehlereintrag. Die Checksum-Korrektur ist nicht enthalten: Sie ist ein separater, optionaler Service. Unsicher, ob Ihr Fall dazugehört? Fordern Sie eine kostenlose Einschätzung an, und unsere Ingenieure prüfen Ihre Datei.
Weitere Dateidienste
Das System hinter diesem Code verstehen: Diagnosestrategie und DTC-Logik
