Öffnungszeiten: täglich 07–23 Uhr

TuningBot DTC-Datenbank · v4.37.15

P1344 Diagnose-Fehlercode (4 Interpretationen)

4 herstellerspezifische Interpretationen bei 3 Herstellern in der TuningBot DTC-Datenbank.

P · AntriebsstrangEngineOBD2
Markenseiten:HyundaiMINIVAG

Hyundai

1 Interpretation
P1344
#4 Ion Line Open Hyundai · engine Datenzuverlässigkeit 62%

The control module detected a fault associated with the #4 Ion Line Open circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Hyundai.

MINI

1 Interpretation
P1344
Misfire During Start Cylinder 2 MINI · ignition Datenzuverlässigkeit 62%

The control module detected a fault associated with the Misfire During Start Cylinder 2 circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by MINI.

VAG

2 Interpretationen
P1344
Ignition amplifier, primary circuit 2 - short to positive VAG · engine Datenzuverlässigkeit 62%

The control module detected a short circuit to battery voltage in the Ignition amplifier, primary circuit 2 circuit. This is the manufacturer-specific definition used by Audi.

Mögliche Ursachen

  • Wiring short to positive
  • ignition amplifier
  • CMP sensor
  • HT leads
  • spark plugs
Gilt für Audi
P1344
Ignition amplifier, primary circuit 2 - short to positive VAG · engine Datenzuverlässigkeit 62%

The control module detected a short circuit to battery voltage in the Ignition amplifier, primary circuit 2 circuit. This is the manufacturer-specific definition used by Volkswagen.

Mögliche Ursachen

  • Wiring short to positive
  • ignition amplifier
  • CMP sensor
  • HT leads
  • spark plugs
Gilt für Volkswagen

Verwandte und benachbarte Codes

So liest man P1344

P

Antriebsstrang: Motor, Getriebe und Antrieb.

1

Herstellerdefinierter Bereich: die Bedeutung kann je Marke abweichen.

344

Spezifischer Fehlerindex innerhalb des Subsystems.

Häufige Fragen zu P1344

Was bedeutet P1344?

Diagnose-Fehlercode (4 Interpretationen). The control module detected a fault associated with the #4 Ion Line Open circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Hyundai.

Ist P1344 generisch oder herstellerspezifisch?

P1344 ist ein herstellerspezifischer Code. In dieser Datenbank ist er dokumentiert für: Hyundai, MINI, VAG. Dieselbe Nummer kann bei anderen Marken etwas anderes bedeuten.

Kann TuningBot P1344 auf Dateiebene entfernen?

Wenn die Fehlerlogik in der Steuergerätekalibrierung liegt, ja: unser DTC-Removal-Dienst deaktiviert den konkreten Fehlereintrag. Die Checksum-Korrektur ist nicht enthalten: Sie ist ein separater, optionaler Service. Unsicher, ob Ihr Fall dazugehört? Fordern Sie eine kostenlose Einschätzung an, und unsere Ingenieure prüfen Ihre Datei.

Weitere Dateidienste

ChiptuningPrüfstandsergebnisse nach Modell und Motor Ergebnisse ansehen →

← Die gesamte DTC-Datenbank durchsuchen