Öffnungszeiten: täglich 07–23 Uhr

TuningBot DTC-Datenbank · v4.41.2

P12A1 Diagnose-Fehlercode (4 Interpretationen)

4 herstellerspezifische Interpretationen bei 2 Herstellern in der TuningBot DTC-Datenbank.

P · AntriebsstrangKraftstoffsystemOBD2
Markenseiten:ChevroletPSA

Chevrolet

1 Interpretation
P12A1
Fuel pump speed circuit - high duty cycle Chevrolet · Kraftstoffsystem Datenzuverlässigkeit 62%

The control module detected a fault associated with the Fuel pump speed circuit - high duty cycle circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Chevrolet.

Mögliche Ursachen

  • Wiring
  • fuel pump flow control module (FPMC)
  • fuel pump flow control module (FPCM) relay

PSA

3 Interpretationen
P12A1
Injector 1 : Injector stuck open PSA · Kraftstoffsystem Datenzuverlässigkeit 72%

The control module detected that the Injector 1 is jammed or locked. Documented for the Bosch MED 17.4.x engine ECU (EP6 THP family) on Peugeot applications; the same PSA control units are also fitted to Citroën models.

Gilt für Peugeot Bosch MED 17.4.x engine ECU (EP6 THP family)
P12A1
No. 1 cylinder : Injector injects too much or remains jammed in the open position PSA · Kraftstoffsystem Datenzuverlässigkeit 72%

The control module detected that the No. 1 cylinder is jammed or locked. Documented for the Continental SID 807 injection ECU (DV6C 1.6 HDi) on Peugeot applications; the same PSA control units are also fitted to Citroën models.

Gilt für Peugeot Continental SID 807 injection ECU (DV6C 1.6 HDi)
P12A1
Correction of injector flow rate cylinder 1 : Fuel injector wear PSA · Kraftstoffsystem Datenzuverlässigkeit 72%

The control module detected the fault condition "Fuel injector wear" for the Correction of injector flow rate cylinder 1. Documented for the Siemens SID 803 injection ECU (DW10BTED4 2.0 HDi) on Peugeot applications; the same PSA control units are also fitted to Citroën models.

Gilt für Peugeot Siemens SID 803 injection ECU (DW10BTED4 2.0 HDi)

Verwandte und benachbarte Codes

So liest man P12A1

P

Antriebsstrang: Motor, Getriebe und Antrieb.

1

Herstellerdefinierter Bereich: die Bedeutung kann je Marke abweichen.

2A1

Spezifischer Fehlerindex innerhalb des Subsystems.

Häufige Fragen zu P12A1

Was bedeutet P12A1?

Diagnose-Fehlercode (4 Interpretationen). The control module detected a fault associated with the Fuel pump speed circuit - high duty cycle circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Chevrolet.

Ist P12A1 generisch oder herstellerspezifisch?

P12A1 ist ein herstellerspezifischer Code. In dieser Datenbank ist er dokumentiert für: Chevrolet, PSA. Dieselbe Nummer kann bei anderen Marken etwas anderes bedeuten.

Kann TuningBot P12A1 auf Dateiebene entfernen?

Wenn die Fehlerlogik in der Steuergerätekalibrierung liegt, ja: unser DTC-Removal-Dienst deaktiviert den konkreten Fehlereintrag. Die Checksum-Korrektur ist nicht enthalten: Sie ist ein separater, optionaler Service. Unsicher, ob Ihr Fall dazugehört? Fordern Sie eine kostenlose Einschätzung an, und unsere Ingenieure prüfen Ihre Datei.

Weitere Dateidienste

ChiptuningPrüfstandsergebnisse nach Modell und Motor Ergebnisse ansehen →

← Die gesamte DTC-Datenbank durchsuchen