P1279 Диагностический код неисправности (11 интерпретаций)

The control module detected an interruption (open circuit) in the Starter motor control circuit, so the expected electrical continuity was not present. This is the manufacturer-specific definition used by Chrysler.

The control module detected an interruption (open circuit) in the Starter motor control circuit, so the expected electrical continuity was not present. This is the manufacturer-specific definition used by Dodge.

The control module detected a fault associated with the VTEC System Malfunction Front Bank 2 circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Honda.

The control module detected an interruption (open circuit) in the Starter control circuit 2 (PCM) circuit, so the expected electrical continuity was not present. This is the manufacturer-specific definition used by Jeep.

The control module detected improper operation of the Injector 2, cylinder 4 circuit. This is the manufacturer-specific definition used by Lexus.

The control module judged the Control Sleeve signal implausible: it stayed inside electrical limits but did not match the value expected for the current operating conditions. This is the manufacturer-specific definition used by Mazda.

The control module detected that the Heated oxygen sensor (HO2S), bank 1 responded more slowly than expected. This is the manufacturer-specific definition used by Nissan.

The control module detected that the Exhaust heat recovery valve fault is jammed or locked. Documented for the Bosch EDC16C34 injection ECU (DV6TED4 1.6 HDi) on Peugeot applications; the same PSA control units are also fitted to Citroën models.

The control module detected a fault associated with the Port Injector Circuit Number 4 circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Toyota.

The control module detected an interruption (open circuit) in the Fuel metering solenoid circuit, so the expected electrical continuity was not present. This is the manufacturer-specific definition used by Audi.

The control module detected an interruption (open circuit) in the Fuel metering solenoid circuit, so the expected electrical continuity was not present. This is the manufacturer-specific definition used by Volkswagen.