Base de données DTC TuningBot · v4.37.15
Interprétation spécifique au constructeur pour PSA. Toutes les interprétations de U1113
The control module detected that the expected Automatic gearbox communication fault with ABS ( ESP) was absent. Documented for the AL4 automatic gearbox ECU on Peugeot applications; the same PSA control units are also fitted to Citroën models.
The stored code identifies a fault of the Fault in communication on the CAN with the ESP ECU. Documented for the AM6/AT6 automatic gearbox ECU on Peugeot applications; the same PSA control units are also fitted to Citroën models. PSA documentation does not characterise the failure mode further.
The control module detected that the expected Fault in communication with the ABS ECU was absent. Documented for the Automated manual gearbox electric control ECU on Peugeot applications; the same PSA control units are also fitted to Citroën models.
The control module detected the fault condition "Fault in communication with the ABS/ ESP ECU" for the CAN network. Documented for the Bosch MED 17.4.x engine ECU (EP6 THP family) on Peugeot applications; the same PSA control units are also fitted to Citroën models.
The control module detected the fault condition "Absence of communication with the ABS/ ESP ECU" for the Intersystems CAN. Documented for the Continental SID 807 injection ECU (DV6C 1.6 HDi) on Peugeot applications; the same PSA control units are also fitted to Citroën models.
The control module detected the fault condition "No communication with the ABS/ ESP ECU" for the Intersystem CAN network. Documented for the Delphi DCM 3.5 injection ECU (DW10C 2.0 HDi) on Peugeot applications; the same PSA control units are also fitted to Citroën models.
The control module detected the fault condition "Nosignal" for the Fault in communication with the ABS ECU or the dynamic stability control ( ESP) ECU. Documented for the MCP 6-speed piloted manual gearbox ECU on Peugeot applications; the same PSA control units are also fitted to Citroën models.
The control module detected the fault condition "Absence of communication with the ABS or the ESP" for the Dialogue with ABS or ESP. Documented for the Magneti Marelli MM6KP engine ECU (EW7A/EW10A) on Peugeot applications; the same PSA control units are also fitted to Citroën models.
Réseau : communication entre calculateurs.
Plage définie par le constructeur : la signification peut varier selon les marques.
Index de défaut spécifique dans le sous-système.
Code défaut de diagnostic (8 interprétations). The control module detected that the expected Automatic gearbox communication fault with ABS ( ESP) was absent. Documented for the AL4 automatic gearbox ECU on Peugeot applications; the same PSA control units are also fitted to Citroën models.
U1113 est un code spécifique au constructeur. Dans cette base il est documenté pour : PSA. Le même numéro peut signifier autre chose sur d'autres marques.
Non garanti. Les codes powertrain (P) se désactivent de façon fiable dans la calibration, mais les codes carrosserie, châssis et réseau dépendent du calculateur et de la façon dont le défaut est implémenté - certains sont traitables, d'autres non. Demandez un devis et nos ingénieurs examineront votre fichier et vous diront gratuitement si U1113 est supprimable dans votre cas.
Comprendre le système derrière ce code : Stratégie de diagnostic et logique DTC
EnglishEN
ItalianoIT
DeutschDE
EspañolES
PortuguêsPT
РусскийRU