The control module detected improper operation of the WT sensor circuit. This is the manufacturer-specific definition used by BMW.
Posibles causas
- Connections
- knock sensor (KS) short to positive
- KS short to ground
- wiring open circuit
Base de datos DTC de TuningBot · v4.37.15
8 interpretaciones específicas del fabricante en 8 fabricantes, en la base de datos DTC de TuningBot.
The control module detected improper operation of the WT sensor circuit. This is the manufacturer-specific definition used by BMW.
The control module detected improper operation of the Cruise control system, inhibit output circuit. This is the manufacturer-specific definition used by Chevrolet.
The control module detected improper operation of the Cruise Inhibit Control circuit. This is the manufacturer-specific definition used by Chrysler.
The control module detected improper operation of the Throttle Control Unit. This is the manufacturer-specific definition used by Ford.
The control module judged the Brake fluid pressure sensor B signal implausible: it stayed inside electrical limits but did not match the value expected for the current operating conditions. This is the manufacturer-specific definition used by Honda.
The control module detected a fault associated with the Misfire With Empty Fuel Tank circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Porsche.
The stored code identifies a fault of the Gear selection actuator position sensor 1 supply fault. Documented for the Automated manual gearbox electric control ECU on Peugeot applications; the same PSA control units are also fitted to Citroën models. PSA documentation does not characterise the failure mode further.
The control module detected an interruption (open circuit) in the Transmission Mount Valves circuit, so the expected electrical continuity was not present. This is the manufacturer-specific definition used by Volkswagen.
Motor y transmisión: motor, cambio y transmisión.
Rango definido por el fabricante: el significado puede variar entre marcas.
Índice específico del fallo dentro del subsistema.
Código de avería diagnóstico (8 interpretaciones). The control module detected improper operation of the WT sensor circuit. This is the manufacturer-specific definition used by BMW.
P1585 es un código específico del fabricante. En esta base de datos está documentado para: BMW, Chevrolet, Chrysler, Ford, Honda, Porsche, PSA, VAG. El mismo número puede significar otra cosa en otras marcas.
Si la lógica del fallo vive en la calibración de la ECU, sí: nuestro servicio DTC Removal desactiva la entrada de fallo concreta. La corrección del checksum no está incluida: es un servicio aparte y opcional. ¿No sabes si tu caso encaja? Solicita una valoración gratuita y nuestros ingenieros revisarán tu archivo.
Entender el sistema detrás de este código: Estrategia de diagnóstico y lógica DTC