Horario: 07–23 todos los días

Base de datos DTC de TuningBot · v4.37.15

02811 Electronic Steering Column Lock Control Module (J764)

1 interpretación específica del fabricante en 1 fabricante, en la base de datos DTC de TuningBot.

SteeringOEM
Páginas por marca:VAG

VAG

1 interpretación
02811
Electronic Steering Column Lock Control Module (J764) VAG · steering Fiabilidad del dato 80%

The control module detected a fault associated with the Electronic Steering Column Lock Control Module (J764) circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Volkswagen. Documented stored variants include: Defective; Faulty. Documented across Volkswagen Group applications (Audi, SEAT and Škoda included).

Síntomas

  • Electronic Steering Column Lock not working
  • Engine not starting

Posibles causas

  • Wiring and/or Connector(s) from/to Electronic Ignition Lock (D9) faulty
  • Electronic Steering Column Lock Control Module (J764) faulty

Comprobaciones recomendadas

  • Check Wiring and/or Connector(s) from/to Electronic Ignition Lock (D9)
  • Check/Replace Electronic Steering Column Lock Control Module (J764)
Se aplica a Volkswagen

Códigos relacionados y cercanos

Preguntas frecuentes sobre 02811

¿Qué significa 02811?

Electronic Steering Column Lock Control Module (J764). The control module detected a fault associated with the Electronic Steering Column Lock Control Module (J764) circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Volkswagen. Documented stored variants include: Defective; Faulty. Documented across Volkswagen Group applications (Audi, SEAT and Škoda included).

¿02811 es genérico o específico del fabricante?

02811 es un código específico del fabricante. En esta base de datos está documentado para: VAG. El mismo número puede significar otra cosa en otras marcas.

¿Puede TuningBot eliminar 02811 a nivel de archivo?

No garantizado. 02811 es un código específico del fabricante en formato OEM, así que la posibilidad de eliminarlo depende de la centralita y de cómo esté implementado el fallo: algunos se pueden tratar y otros no. Pide presupuesto y nuestros ingenieros revisarán tu archivo y te dirán gratis si 02811 se puede eliminar en tu caso.

Otros servicios de archivo

ReprogramaciónResultados Stage 1 en banco para motores VAG Ver los resultados →

← Buscar en toda la base de datos DTC