Horário: 07h–23h diariamente

Base de dados DTC TuningBot · v4.37.15

02811 Electronic Steering Column Lock Control Module (J764)

1 interpretação específica do fabricante em 1 fabricante na base de dados DTC TuningBot.

SteeringOEM
Páginas por marca:VAG

VAG

1 interpretação
02811
Electronic Steering Column Lock Control Module (J764) VAG · steering Fiabilidade do dado 80%

The control module detected a fault associated with the Electronic Steering Column Lock Control Module (J764) circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Volkswagen. Documented stored variants include: Defective; Faulty. Documented across Volkswagen Group applications (Audi, SEAT and Škoda included).

Sintomas

  • Electronic Steering Column Lock not working
  • Engine not starting

Causas possíveis

  • Wiring and/or Connector(s) from/to Electronic Ignition Lock (D9) faulty
  • Electronic Steering Column Lock Control Module (J764) faulty

Verificações recomendadas

  • Check Wiring and/or Connector(s) from/to Electronic Ignition Lock (D9)
  • Check/Replace Electronic Steering Column Lock Control Module (J764)
Aplica-se a Volkswagen

Códigos relacionados e próximos

Perguntas frequentes sobre 02811

O que significa 02811?

Electronic Steering Column Lock Control Module (J764). The control module detected a fault associated with the Electronic Steering Column Lock Control Module (J764) circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Volkswagen. Documented stored variants include: Defective; Faulty. Documented across Volkswagen Group applications (Audi, SEAT and Škoda included).

02811 é genérico ou específico do fabricante?

02811 é um código específico do fabricante. Nesta base de dados está documentado para: VAG. O mesmo número pode significar outra coisa noutras marcas.

A TuningBot consegue remover 02811 ao nível do ficheiro?

Não garantido. 02811 é um código específico do fabricante num formato OEM, por isso a remoção depende da centralina e de como a avaria está implementada - alguns são tratáveis, outros não. Peça um orçamento e os nossos engenheiros verificam o ficheiro e dizem-lhe gratuitamente se 02811 é removível no seu caso.

Outros serviços de ficheiro

RemapeamentoResultados Stage 1 no dinamômetro para motores VAG Ver os resultados →

← Pesquisar em toda a base de dados DTC