Horario: 07–23 todos los días

Base de datos DTC de TuningBot · v4.37.15

02830 Control Circuit for CAN Isolator for Driver Assistance Systems

1 interpretación específica del fabricante en 1 fabricante, en la base de datos DTC de TuningBot.

OEM
Páginas por marca:VAG

VAG

1 interpretación
02830
Control Circuit for CAN Isolator for Driver Assistance Systems VAG · unknown Fiabilidad del dato 80%

The control module detected a fault associated with the Control Circuit for CAN Isolator for Driver Assistance Systems circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Volkswagen. Documented stored variants include: Electrical Fault in Circuit. Documented across Volkswagen Group applications (Audi, SEAT and Škoda included).

Posibles causas

  • Supply Voltage insufficient
  • Control Module Coding incorrect
  • Incorrect Control Module installed

Comprobaciones recomendadas

  • Check Control Module Power Supply
  • Check Control Module Coding (see Vehicle specific Diagnostic Procedures)
  • Check CAN-Databus Powertrain Cut-Off Relay (J788)
  • Check if Control Module (Part Number) fits the Car's Equipment
Se aplica a Volkswagen

Códigos relacionados y cercanos

Preguntas frecuentes sobre 02830

¿Qué significa 02830?

Control Circuit for CAN Isolator for Driver Assistance Systems. The control module detected a fault associated with the Control Circuit for CAN Isolator for Driver Assistance Systems circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Volkswagen. Documented stored variants include: Electrical Fault in Circuit. Documented across Volkswagen Group applications (Audi, SEAT and Škoda included).

¿02830 es genérico o específico del fabricante?

02830 es un código específico del fabricante. En esta base de datos está documentado para: VAG. El mismo número puede significar otra cosa en otras marcas.

¿Puede TuningBot eliminar 02830 a nivel de archivo?

No garantizado. 02830 es un código específico del fabricante en formato OEM, así que la posibilidad de eliminarlo depende de la centralita y de cómo esté implementado el fallo: algunos se pueden tratar y otros no. Pide presupuesto y nuestros ingenieros revisarán tu archivo y te dirán gratis si 02830 se puede eliminar en tu caso.

Otros servicios de archivo

ReprogramaciónResultados Stage 1 en banco para motores VAG Ver los resultados →

← Buscar en toda la base de datos DTC