Horario: 07–23 todos los días

Base de datos DTC de TuningBot · v4.37.15

02811 VAG - Electronic Steering Column Lock Control Module (J764)

Interpretación específica del fabricante para VAG. Todas las interpretaciones de 02811

SteeringOEM

Qué significa 02811

02811
Electronic Steering Column Lock Control Module (J764) VAG · steering Fiabilidad del dato 80%

The control module detected a fault associated with the Electronic Steering Column Lock Control Module (J764) circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Volkswagen. Documented stored variants include: Defective; Faulty. Documented across Volkswagen Group applications (Audi, SEAT and Škoda included).

Síntomas

  • Electronic Steering Column Lock not working
  • Engine not starting

Posibles causas

  • Wiring and/or Connector(s) from/to Electronic Ignition Lock (D9) faulty
  • Electronic Steering Column Lock Control Module (J764) faulty

Comprobaciones recomendadas

  • Check Wiring and/or Connector(s) from/to Electronic Ignition Lock (D9)
  • Check/Replace Electronic Steering Column Lock Control Module (J764)
Se aplica a Volkswagen

Códigos relacionados y cercanos

Preguntas frecuentes sobre 02811

¿Qué significa 02811?

Electronic Steering Column Lock Control Module (J764). The control module detected a fault associated with the Electronic Steering Column Lock Control Module (J764) circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Volkswagen. Documented stored variants include: Defective; Faulty. Documented across Volkswagen Group applications (Audi, SEAT and Škoda included).

¿02811 es genérico o específico del fabricante?

02811 es un código específico del fabricante. En esta base de datos está documentado para: VAG. El mismo número puede significar otra cosa en otras marcas.

¿Puede TuningBot eliminar 02811 a nivel de archivo?

No garantizado. 02811 es un código específico del fabricante en formato OEM, así que la posibilidad de eliminarlo depende de la centralita y de cómo esté implementado el fallo: algunos se pueden tratar y otros no. Pide presupuesto y nuestros ingenieros revisarán tu archivo y te dirán gratis si 02811 se puede eliminar en tu caso.

Otros servicios de archivo

ReprogramaciónResultados Stage 1 en banco para motores VAG Ver los resultados →

← Buscar en toda la base de datos DTC