ItalianoIT
DeutschDE
EspañolES
PortuguêsPT
FrançaisFR
РусскийRU
Fiat Bravo ECU Tuning: Stage 1 Gains by Engine
Dyno-tested Stage 1 results for every Fiat Bravo engine we have on the bench. Pick your engine for the full page with ECUs, notes and services, or upload your file straight away.
Generations covered: Bravo II
Stage 1 gains by engine
Best Stage 1 result per engine family on the power variants this model carries; the table below lists the versions matched exactly.
| Engine | Stock | HP Gain | Torque Gain | Details |
|---|---|---|---|---|
| 1.4 16V petrol | 135–180 hp | from +11 to +32 hp | +90 Nm | Engine page → |
| 1.4 16V petrol | 78 hp | +24 hp | n/a | Engine page → |
| 1.4 MultiAir petrol | 135–170 hp | +19 hp | +42 Nm | Engine page → |
| 1.4 TJET petrol | 105–120 hp | from +23 to +38 hp | +74 Nm | Engine page → |
| 1.6 MJET diesel | 105–130 hp | from +21 to +30 hp | +63 Nm | Engine page → |
| 1.9 JTDM diesel | 120–150 hp | +34 hp | +74 Nm | Engine page → |
| 2.0 CDTI diesel | 110–150 hp | from +21 to +27 hp | +42 Nm | Engine page → |
| 2.0 CRDI diesel | 136–150 hp | from +32 to +41 hp | +76 Nm | Engine page → |
| 2.0 JTDM diesel | 170 hp | +32 hp | +68 Nm | Engine page → |
| 2.0 VCDI diesel | 150 hp | +28 hp | +44 Nm | Engine page → |
Figures are dyno-tested averages and may vary with hardware condition and fuel quality.
Measured by version
Versions of this model whose ECU and stock power match a dyno row exactly: the figure is the one measured on that engine, not a family average.
| Version | Engine | ECU | Stock | HP Gain | Torque Gain | Order |
|---|---|---|---|---|---|---|
| Fiat Bravo Ii petrol | 1.4 TJET | ME7.9.10 | 120 hp | +36 hp. 156 hp · +30% | +72 Nm | Order file → |
| Fiat Bravo Ii diesel | 1.9 JTDM | EDC16C39 | 120 hp | +34 hp. 154 hp · +28% | +74 Nm | Order file → |
| Fiat Bravo Ii diesel | 1.9 JTDM | EDC16C39 | 150 hp | +33 hp. 183 hp · +22% | +55 Nm | Order file → |
| Fiat Bravo Ii diesel | 2.0 JTDM | EDC16C39 | 165 hp | +32 hp. 197 hp · +19% | +68 Nm | Order file → |
| Fiat Bravo diesel | EDC15C7 | 100 hp | +30 hp 130 hp · +30% | +65 Nm | Order file → | |
| Fiat Bravo Ii diesel | 1.6 MJET | EDC16C39 | 105 hp | +27 hp. 132 hp · +26% | +42 Nm | Order file → |
| Fiat Bravo Ii diesel | 1.6 MJET | EDC16C39 | 120 hp | +27 hp. 147 hp · +23% | +58 Nm | Order file → |
| Fiat Bravo Ii petrol | 1.4 MultiAir | MM8GMF | 135 hp | +19 hp. 154 hp · +14% | +42 Nm | Order file → |
| Fiat Bravo Ii petrol | 1.4 MultiAir | MM8GMF | 140 hp | +19 hp. 159 hp · +14% | +42 Nm | Order file → |
| Fiat Bravo Ii petrol | 1.4 16V | ME7.9.10 | 150 hp | +11 hp. 161 hp · +7% | +58 Nm | Order file → |
11 more versions of the Fiat Bravo are in our catalogue: we read their ECU and remap them, the dyno figure is not published yet. Upload your file. Order file →
Measured here, tunable everywhere
The Fiat Bravo engines listed above are the ones we have run on the dyno, so the figures on their pages are readings rather than software estimates. They are not the limit of what we tune: every ECU, engine and model we can read can be remapped for power, Fiat Bravo or otherwise. If your engine is not on this list, upload the original file anyway.
Every figure here was measured on this engine at a stock power your car has, sometimes on another car fitted with the same unit; the per-version table below marks only the exact matches.
ECU services available on Fiat Bravo
Solutions supported on the ECUs fitted to this model. Each engine page lists exactly which ones apply to its control units.
Frequently Asked Questions
Which Fiat Bravo engines can be remapped?
The 10 engines in the table above were measured on our dyno: 1.4 16V, 1.4 16V, 1.4 MultiAir, 1.4 TJET, 1.6 MJET, 1.9 JTDM, 2.0 CDTI, 2.0 CRDI, 2.0 JTDM and 2.0 VCDI. Other Fiat Bravo engines can be remapped too when we can read the ECU - the table is what we publish, not the limit of the service.
How much power does a Stage 1 add on a Fiat Bravo?
Between +11 and +36 hp depending on the engine; the best result measured is +36 hp on the 1.4 TJET. Every figure is a dyno reading on stock hardware, not an estimate.
Do I have to send the Fiat Bravo ECU?
No. Read the original file with your tool (KESS3, Autotuner, CMD, Dimsport, PCMTuner and others), upload it, and the tuned file comes back in minutes to write into the car. Only the file travels.
Order your Fiat Bravo tuning file
Upload your original ECU file and receive a professional calibration in minutes.
Tune Your File →v4.31.28