ItalianoIT
DeutschDE
EspañolES
PortuguêsPT
FrançaisFR
РусскийRU
Abarth 1.4 16V Remap & Chiptuning – 500, 595, 695
Professional ECU tuning and remapping for the Abarth 1.4 16V petrol engine. Our dyno-tested Stage 1 and Stage 2 calibrations sharpen throttle response and power delivery, with options such as Pop & Bang, GPF/OPF off and limiter changes for supported ECUs.
Engine codes: 1.4 T-Jet
Fitted to 500595695
Performance Gains (Dyno-Tested)
| Engine | Stock | Tuned | HP Gain | Torque Gain | ECU | Order |
|---|---|---|---|---|---|---|
| 1.4 16V | 140 hp | 170 hp | +30 hp +21% | +90 Nm | ME17.3.0Stage 1 | Order file → |
| 1.4 16V | 145 hp | 172 hp | +27 hp +19% | +84 Nm | ME17.3.0Stage 1 | Order file → |
| 1.4 16V | 160 hp | 171 hp | +11 hp +7% | +63 Nm | ME17.3.0Stage 1 | Order file → |
| 1.4 16V | 165 hp | 192 hp | +27 hp +16% | +74 Nm | ME17.3.0Stage 1 | Order file → |
| 1.4 16V | 180 hp | 191 hp | +11 hp +6% | +53 Nm | ME17.3.0Stage 1 | Order file → |
| 1.4 16V | 165/180 hp | 192/207 hp | +27 hp +15 to +16% | n/a | ME17.3.0Stage 2 | Order file → |
| 1.4 16V | 145/160 hp | 162/177 hp | +17 hp +11 to +12% | n/a | ME17.3.0Stage 2 | Order file → |
| 1.4 16V | 135 hp | 167 hp | +32 hp +24% | +74 Nm | ME7.9.10Stage 1 | Order file → |
| 1.4 16V | 140 hp | 169 hp | +29 hp +21% | +69 Nm | ME7.9.10Stage 1 | Order file → |
| 1.4 16V | 155 hp | 166 hp | +11 hp +7% | +58 Nm | ME7.9.10Stage 1 | Order file → |
| 1.4 16V | 160 hp | 171 hp | +11 hp +7% | +53 Nm | ME7.9.10Stage 1 | Order file → |
| 1.4 16V | 180 hp | 201 hp | +21 hp +12% | +45 Nm | ME7.9.10Stage 1 | Order file → |
Figures are dyno-tested averages and may vary with hardware condition and fuel quality.
Cars this engine is fitted to
500, 595, 695, Abarth Grande Punto, Alfa Romeo Giulietta, Fiat Bravo II and 3 more across Abarth, Alfa and Fiat
Fitment is read from the ECU part numbers in our own database, not from a generic catalogue. The same engine and control unit are fitted to several cars, which is why one page serves them all.
Fiat · 3
Alfa Romeo · 2Measured here, tunable everywhere
The figures in the table above are readings taken on the dyno for this engine, not software estimates rounded up to sell a file, and our Stage 1 is calibrated to stay inside the margins the engine was designed with. Only a part of our work is published this way: every ECU, engine and model we can read can be remapped for power, measured page or not.
Available ECU Services for this Engine
The following solutions are supported on the ECU(s) of this vehicle (Petrol):
Technical Notes per ECU
Disconnection and read requirements differ by ECU. The notes below apply to the specific ECU listed; the exact removal scope per service is confirmed on each service page.
Each note is tagged with the service it refers to and applies to the ECU it is listed under. Mechanical preparation is the installer's responsibility. Emission-related solutions are for off-road or motorsport use where permitted by law.
Supported ECU(s): ME17.3.0, ME7.9.10
Frequently Asked Questions
How much power can a Abarth 1.4 16V gain with Stage 1 tuning?
Stage 1 ECU tuning for the Abarth 1.4 16V can add up to +32 hp and +90 Nm of torque, based on dyno-tested calibrations. Actual figures depend on the exact engine variant and hardware condition.
Can EGR be removed on the Abarth 1.4 16V?
EGR off is supported on the ECU(s) of this vehicle, strictly for off-road or motorsport use where permitted by law. The exact mechanical preparation and sensor handling are listed per ECU in the technical notes below.
How do I order and how fast is the tuning file delivered?
Upload your original ECU read through the tuning page and receive the calibration by email. Most files are delivered within 15-20 minutes during working hours (daily, 07:00-23:00 CET).
Is the Abarth 1.4 16V tuning file plug-and-play?
You receive a ready-to-flash calibration based on your original file. Flashing it back to the ECU and any related mechanical preparation are handled by the installer with their own tools.
Order your Abarth 1.4 16V tuning file
Upload your original ECU file and receive a professional calibration in 15-20 minutes.
Tune Your File →v4.31.23