Hours: 07–23 daily

TuningBot DTC Database · v4.40.3

P1411 VAG - Diagnostic Trouble Code (2 interpretations)

Manufacturer-specific interpretation for VAG. All interpretations of P1411

P · PowertrainEmissionsOBD2

What P1411 means

P1411
Secondary air injection (AIR) system, Bank 2 - insufficient flow detected VAG · emissions Data confidence 62%

The control module detected that the measured Secondary air injection (AIR) system, Bank 2 flow was lower than the value expected while operation was commanded. This is the manufacturer-specific definition used by Audi.

Possible causes

  • Intake leak
  • hose(s) blocked/leaking
  • AIR valve/solenoid
Applies to Audi
P1411
Secondary Air Injection System; Bank 2: Insufficient Flow VAG · emissions Data confidence 88%

The control module detected that the measured Secondary Air Injection System; Bank 2 flow was lower than the value expected while operation was commanded. This is the manufacturer-specific definition used by Volkswagen. Volkswagen Group tools also report it as fault code 17819. Documented across Volkswagen Group applications (Audi, SEAT and Škoda included).

Symptoms

Malfunction Indicator Light (MIL) active

Possible causes

  • Fuse for Secondary Air Injection Pump blown
  • Vacuum Hose(s) leaky or collapsed
  • Secondary Air Injection Solenoid(s) faulty
  • Combi Valve(s) faulty

Recommended checks

  • Check Fuse for Secondary Air Injection Pump
  • Check Vacuum Hose(s)
  • Check Secondary Air Injection Solenoid(s)
  • Check Combi Valve(s)
Applies to Volkswagen

Related and nearby codes

How to read P1411

P

Powertrain: engine, transmission and driveline systems.

1

Manufacturer-defined range: the meaning can differ between brands.

411

Specific fault index within the subsystem.

Frequently asked questions about P1411

What does P1411 mean?

Diagnostic Trouble Code (2 interpretations). The control module detected that the measured Secondary air injection (AIR) system, Bank 2 flow was lower than the value expected while operation was commanded. This is the manufacturer-specific definition used by Audi.

Is P1411 generic or manufacturer-specific?

P1411 is a manufacturer-specific code. In this database it is documented for: VAG. The same number can mean something different on other brands.

Can TuningBot remove P1411 at file level?

If the fault logic lives in the ECU calibration, yes: our DTC Removal file service disables the specific fault entry. Checksum correction is not included: it is a separate, optional service. Not sure whether your case qualifies? Request a free assessment and our engineers will check your ECU file.

Other file services

ECU tuningStage 1 dyno results for VAG engines See the results →

← Search the full DTC database