Das Steuergerät hat eine Stromkreisunterbrechung erkannt (betroffen: Lambdasonden-Pumpstrom Korrektur); die erwartete elektrische Durchgängigkeit war nicht gegeben.
Symptome
Motorkontrollleuchte (MIL) leuchtet
Möglicher erhöhter Kraftstoffverbrauch
Möglicher instabiler Leerlauf
Mögliche Ursachen
Kabelbaum
H025
ECM
Empfohlene Prüfungen
Sensorspannung/-strom und Heizungsstatus in den Live-Daten auslesen
Kabelbaum und Steckverbindungen prüfen
Auf Abgasundichtigkeiten in Sensornähe prüfen
Gemischkorrekturwerte auf vorgelagerte Gemischfehler prüfen
O2 Sensor Positive Current Trim Circuit High (Bank 1, Sensor 1)
Ford · Abgas
Datenzuverlässigkeit94%
Ford documents P2626:12 (circuit short to battery) for its 2024-2025 gasoline-engine OBD monitor strategy as o2 sensor positive current trim circuit high (bank 1, sensor 1). This three-byte interpretation is application-specific and identifies the detected monitor condition rather than a confirmed failed component.
Empfohlene Prüfungen
Perform a full module scan
Review freeze-frame and occurrence data
Inspect relevant wiring and connectors
Check power supplies and grounds
Compare commanded and measured values
Check applicable OEM service information
Gilt fürFord gasoline-engine OBD applications|2024-2025 model years
P2626:13
O2 Sensor Positive Current Trim Circuit Open (Bank 1, Sensor 1)
Ford · Abgas
Datenzuverlässigkeit94%
Ford documents P2626:13 (circuit open) for its 2024-2025 gasoline-engine OBD monitor strategy as o2 sensor positive current trim circuit open (bank 1, sensor 1). This three-byte interpretation is application-specific and identifies the detected monitor condition rather than a confirmed failed component.
Empfohlene Prüfungen
Perform a full module scan
Review freeze-frame and occurrence data
Inspect relevant wiring and connectors
Check power supplies and grounds
Compare commanded and measured values
Check applicable OEM service information
Gilt fürFord gasoline-engine OBD applications|2024-2025 model years
P2626:14
O2 Sensor Positive Current Trim circuit Low (Bank 1, Sensor 1)
Ford · Abgas
Datenzuverlässigkeit94%
Ford documents P2626:14 (circuit short to ground or open) for its 2024-2025 gasoline-engine OBD monitor strategy as o2 sensor positive current trim circuit low (bank 1, sensor 1). This three-byte interpretation is application-specific and identifies the detected monitor condition rather than a confirmed failed component.
Empfohlene Prüfungen
Perform a full module scan
Review freeze-frame and occurrence data
Inspect relevant wiring and connectors
Check power supplies and grounds
Compare commanded and measured values
Check applicable OEM service information
Gilt fürFord gasoline-engine OBD applications|2024-2025 model years
Generischer SAE-Standardcode: gleiche Bedeutung bei jeder Marke.
626
Spezifischer Fehlerindex innerhalb des Subsystems.
Häufige Fragen zu P2626
Was bedeutet P2626?
Diagnose-Fehlercode (3 Varianten). Das Steuergerät hat eine Stromkreisunterbrechung erkannt (betroffen: Lambdasonden-Pumpstrom Korrektur); die erwartete elektrische Durchgängigkeit war nicht gegeben.
Ist P2626 generisch oder herstellerspezifisch?
P2626 existiert sowohl als generischer OBD-II-Code (gleiche Bedeutung bei jeder Marke) als auch mit 1 herstellerspezifischen Interpretationen: Ford. Immer im Kontext Ihres Fahrzeugs lesen.
Kann TuningBot P2626 auf Dateiebene entfernen?
Wenn die Fehlerlogik in der Steuergerätekalibrierung liegt, ja: unser DTC-Removal-Dienst deaktiviert den konkreten Fehlereintrag. Die Checksum-Korrektur ist nicht enthalten: Sie ist ein separater, optionaler Service. Unsicher, ob Ihr Fall dazugehört? Fordern Sie eine kostenlose Einschätzung an, und unsere Ingenieure prüfen Ihre Datei.