O2 Sensor Pumping Current Trim Circuit/Open Bank 1 Sensor 1
Generico · emissions
Affidabilità del dato85%
The control module detected an interruption (open circuit) in the O2 Sensor Pumping Current Trim circuit, so the expected electrical continuity was not present.
Sintomi
MIL illuminated
Possible increased fuel consumption
Possible unstable idle
Possibili cause
Wiring
H025
ECM
Controlli consigliati
Read live sensor voltage/current and heater status
Inspect wiring and connectors
Check for exhaust leaks near the sensor
Check fuel trim values for upstream mixture faults
O2 Sensor Positive Current Trim Circuit High (Bank 1, Sensor 1)
Ford · emissions
Affidabilità del dato94%
Ford documents P2626:12 (circuit short to battery) for its 2024-2025 gasoline-engine OBD monitor strategy as o2 sensor positive current trim circuit high (bank 1, sensor 1). This three-byte interpretation is application-specific and identifies the detected monitor condition rather than a confirmed failed component.
Controlli consigliati
Perform a full module scan
Review freeze-frame and occurrence data
Inspect relevant wiring and connectors
Check power supplies and grounds
Compare commanded and measured values
Check applicable OEM service information
Si applica aFord gasoline-engine OBD applications|2024-2025 model years
P2626:13
O2 Sensor Positive Current Trim Circuit Open (Bank 1, Sensor 1)
Ford · emissions
Affidabilità del dato94%
Ford documents P2626:13 (circuit open) for its 2024-2025 gasoline-engine OBD monitor strategy as o2 sensor positive current trim circuit open (bank 1, sensor 1). This three-byte interpretation is application-specific and identifies the detected monitor condition rather than a confirmed failed component.
Controlli consigliati
Perform a full module scan
Review freeze-frame and occurrence data
Inspect relevant wiring and connectors
Check power supplies and grounds
Compare commanded and measured values
Check applicable OEM service information
Si applica aFord gasoline-engine OBD applications|2024-2025 model years
P2626:14
O2 Sensor Positive Current Trim circuit Low (Bank 1, Sensor 1)
Ford · emissions
Affidabilità del dato94%
Ford documents P2626:14 (circuit short to ground or open) for its 2024-2025 gasoline-engine OBD monitor strategy as o2 sensor positive current trim circuit low (bank 1, sensor 1). This three-byte interpretation is application-specific and identifies the detected monitor condition rather than a confirmed failed component.
Controlli consigliati
Perform a full module scan
Review freeze-frame and occurrence data
Inspect relevant wiring and connectors
Check power supplies and grounds
Compare commanded and measured values
Check applicable OEM service information
Si applica aFord gasoline-engine OBD applications|2024-2025 model years
Codice generico standard SAE: stesso significato su ogni marca.
626
Indice specifico del guasto dentro il sottosistema.
Domande frequenti su P2626
Cosa significa P2626?
Codice di errore diagnostico (3 varianti). The control module detected an interruption (open circuit) in the O2 Sensor Pumping Current Trim circuit, so the expected electrical continuity was not present.
P2626 è generico o specifico del costruttore?
P2626 esiste sia come codice generico OBD-II (stesso significato su ogni marca) sia con 1 interpretazioni specifiche del costruttore: Ford. Va sempre letto nel contesto del tuo veicolo.
TuningBot può rimuovere P2626 a livello di file?
Se la logica del guasto vive nella calibrazione della ECU, sì: il nostro servizio DTC Removal disattiva la specifica voce di errore e, se la ECU lo richiede, ricalcola anche il checksum. Non sei sicuro che il tuo caso rientri? Richiedi una valutazione gratuita e i nostri ingegneri controllano il tuo file.
EnglishEN
DeutschDE
EspañolES
PortuguêsPT
FrançaisFR
РусскийRU
Ford