Throttle Actuator B Control Motor Circuit/Open
Generisch · engine
Datenzuverlässigkeit65%
The control module detected an interruption (open circuit) in the Throttle Actuator B Control Motor circuit, so the expected electrical continuity was not present.
Throttle Actuator “B” Control Motor Current Range/Performance
Ford · engine
Datenzuverlässigkeit94%
Ford documents P210A:1D for its 2024-2025 gasoline-engine OBD monitor strategy as throttle actuator “b” control motor current range/performance. This three-byte interpretation is application-specific and identifies the detected monitor condition rather than a confirmed failed component.
Empfohlene Prüfungen
Perform a full module scan
Review freeze-frame and occurrence data
Compare commanded and measured values
Check applicable OEM service information
Gilt fürFord gasoline-engine OBD applications|2024-2025 model years
P210A:72
Throttle Actuator “B” Control System – Stuck Open
Ford · engine
Datenzuverlässigkeit94%
Ford documents P210A:72 (actuator stuck open) for its 2024-2025 gasoline-engine OBD monitor strategy as throttle actuator “b” control system – stuck open. This three-byte interpretation is application-specific and identifies the detected monitor condition rather than a confirmed failed component.
Empfohlene Prüfungen
Perform a full module scan
Review freeze-frame and occurrence data
Compare commanded and measured values
Check applicable OEM service information
Gilt fürFord gasoline-engine OBD applications|2024-2025 model years
P210A:73
Throttle Actuator “B” Control System – Stuck Closed
Ford · engine
Datenzuverlässigkeit94%
Ford documents P210A:73 for its 2024-2025 gasoline-engine OBD monitor strategy as throttle actuator “b” control system – stuck closed. This three-byte interpretation is application-specific and identifies the detected monitor condition rather than a confirmed failed component.
Empfohlene Prüfungen
Perform a full module scan
Review freeze-frame and occurrence data
Compare commanded and measured values
Check applicable OEM service information
Gilt fürFord gasoline-engine OBD applications|2024-2025 model years
P210A:92
Throttle Actuator “B” Control Throttle Body Range/Performance
Ford · engine
Datenzuverlässigkeit94%
Ford documents P210A:92 for its 2024-2025 gasoline-engine OBD monitor strategy as throttle actuator “b” control throttle body range/performance. This three-byte interpretation is application-specific and identifies the detected monitor condition rather than a confirmed failed component.
Empfohlene Prüfungen
Perform a full module scan
Review freeze-frame and occurrence data
Compare commanded and measured values
Check applicable OEM service information
Gilt fürFord gasoline-engine OBD applications|2024-2025 model years
P210A:95
Throttle Actuator “B” Control Motor Circuit Range/Performance
Ford · engine
Datenzuverlässigkeit94%
Ford documents P210A:95 for its 2024-2025 gasoline-engine OBD monitor strategy as throttle actuator “b” control motor circuit range/performance. This three-byte interpretation is application-specific and identifies the detected monitor condition rather than a confirmed failed component.
Empfohlene Prüfungen
Perform a full module scan
Review freeze-frame and occurrence data
Inspect relevant wiring and connectors
Check power supplies and grounds
Compare commanded and measured values
Check applicable OEM service information
Gilt fürFord gasoline-engine OBD applications|2024-2025 model years
Generischer SAE-Standardcode: gleiche Bedeutung bei jeder Marke.
10A
Spezifischer Fehlerindex innerhalb des Subsystems.
Häufige Fragen zu P210A
Was bedeutet P210A?
Diagnose-Fehlercode (5 Varianten). The control module detected an interruption (open circuit) in the Throttle Actuator B Control Motor circuit, so the expected electrical continuity was not present.
Ist P210A generisch oder herstellerspezifisch?
P210A existiert sowohl als generischer OBD-II-Code (gleiche Bedeutung bei jeder Marke) als auch mit 1 herstellerspezifischen Interpretationen: Ford. Immer im Kontext Ihres Fahrzeugs lesen.
Kann TuningBot P210A auf Dateiebene entfernen?
Wenn die Fehlerlogik in der Steuergerätekalibrierung liegt, ja: unser DTC-Removal-Dienst deaktiviert den konkreten Fehlereintrag. Die Checksum-Korrektur ist nicht enthalten: Sie ist ein separater, optionaler Service. Unsicher, ob Ihr Fall dazugehört? Fordern Sie eine kostenlose Einschätzung an, und unsere Ingenieure prüfen Ihre Datei.
Ford
EnglishEN
ItalianoIT
EspañolES
PortuguêsPT
FrançaisFR
РусскийRU