Часы работы: 07–23 ежедневно

База данных DTC TuningBot · v4.37.15

P1368 Диагностический код неисправности (8 интерпретаций)

8 интерпретаций производителей у 5 производителей в базе DTC TuningBot.

P · Силовой агрегатEngineOBD2
Страницы по маркам:ChevroletChryslerLand RoverPSAVAG

Chevrolet

1 интерпретация
P1368
Ignition Control Cylinder 8 Not Toggling After Enable Chevrolet · engine Достоверность данных 80%

The control module detected a fault associated with the Ignition Control Cylinder 8 Not Toggling After Enable circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Chevrolet.

Chrysler

1 интерпретация
P1368
IC Cylinder 8 Not Toggling After Enable Chrysler · engine Достоверность данных 62%

The control module detected a fault associated with the IC Cylinder 8 Not Toggling After Enable circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Chrysler.

Рекомендуемые проверки

  • Perform a full module scan
  • Review freeze-frame and occurrence data
  • Confirm the exact vehicle, ECU and software context
  • Inspect relevant wiring and connectors
  • Check applicable OEM service information

Land Rover

1 интерпретация
P1368
Ignition system - circuit malfunction Land Rover · engine Достоверность данных 62%

The control module detected improper operation of the Ignition system circuit. This is the manufacturer-specific definition used by Land Rover.

Возможные причины

  • Wiring
  • ignition coil

PSA

4 интерпретаций
P1368
Control of injector for cylinder n°3 : Injector voltage too low PSA · fuel Достоверность данных 72%

The control module detected that the Control of injector for cylinder n°3 was below its expected limit. Documented for the Bosch EDC16C34 injection ECU (DV6TED4 1.6 HDi) on Peugeot applications; the same PSA control units are also fitted to Citroën models.

Применимо к Peugeot Bosch EDC16C34 injection ECU (DV6TED4 1.6 HDi)
P1368
Injector 3 control : Electrical specifications outside the norms (harness or injector) PSA · fuel Достоверность данных 72%

The control module detected the fault condition "Electrical specifications outside the norms (harness or injector)" for the Injector 3 control. Documented for the Continental SID 807 injection ECU (DV6C 1.6 HDi) on Peugeot applications; the same PSA control units are also fitted to Citroën models.

Применимо к Peugeot Continental SID 807 injection ECU (DV6C 1.6 HDi)
P1368
Injector 3 control : Electrical characteristics outside the standards (Harness or injector) PSA · fuel Достоверность данных 72%

The control module detected the fault condition "Electrical characteristics outside the standards (Harness or injector)" for the Injector 3 control. Documented for the Delphi DCM 3.5 injection ECU (DW10C 2.0 HDi) on Peugeot applications; the same PSA control units are also fitted to Citroën models.

Применимо к Peugeot Delphi DCM 3.5 injection ECU (DW10C 2.0 HDi)
P1368
Control of injector for cylinder n°3 : Injector voltage too low PSA · fuel Достоверность данных 72%

The control module detected that the Control of injector for cylinder n°3 was below its expected limit. Documented for the Siemens SID 803 injection ECU (DW10BTED4 2.0 HDi) on Peugeot applications; the same PSA control units are also fitted to Citroën models.

Применимо к Peugeot Siemens SID 803 injection ECU (DW10BTED4 2.0 HDi)

VAG

1 интерпретация
P1368
Ignition coil/amplifier, cylinder 5 - short to positive VAG · ignition Достоверность данных 62%

The control module detected a short circuit to battery voltage in the Ignition coil/amplifier, cylinder 5 circuit. This is the manufacturer-specific definition used by Audi.

Возможные причины

  • Wiring short to positive
  • ignition coil/ amplifier
Применимо к Audi

Связанные и соседние коды

Как читать P1368

P

Силовой агрегат: двигатель, коробка и трансмиссия.

1

Диапазон, заданный производителем: значение может отличаться у разных марок.

368

Конкретный индекс неисправности внутри подсистемы.

Частые вопросы о P1368

Что означает P1368?

Диагностический код неисправности (8 интерпретаций). The control module detected a fault associated with the Ignition Control Cylinder 8 Not Toggling After Enable circuit or function; the stored code identifies the affected component rather than a single failure mode. This is the manufacturer-specific definition used by Chevrolet.

P1368 — общий код или специфичный для производителя?

P1368 — код конкретного производителя. В этой базе он описан для: Chevrolet, Chrysler, Land Rover, PSA, VAG. Тот же номер у других марок может означать другое.

Может ли TuningBot удалить P1368 на уровне файла?

Если логика неисправности заложена в калибровке ЭБУ — да: наша услуга DTC Removal отключает конкретную запись ошибки. Коррекция checksum не входит в услугу: это отдельная опциональная услуга. Не уверены, подходит ли ваш случай? Запросите бесплатную оценку, и наши инженеры проверят ваш файл.

Другие услуги по файлу

Чип-тюнингРезультаты со стенда, по моделям и двигателям Смотреть результаты →

← Искать по всей базе DTC